investigation of the bending moment and stress carrying capacity in l-shaped biscuit joints fabricated with solid wood and wood based composite

نویسندگان

حسین رنگ آور

دانشگاه شهید رجایی منوچهر عباسی

هنرآموز هنرستان فنی

چکیده

this study was aimed to investigate the bending moment and stress (inner and outer corners) in lshaped biscuit joint made of solid wood, particleboard and medium density fiberboard (mdf). for this purpose, l-shaped joints made of beech and fir, particleboard and mdf by biscuit size numbers of 0 (47×15×3.8 mm), 10 (53×19×3.8mm) and 20 (60×23×3.8mm). bending moment and stress carrying capacity of the joints were compared to each other. results showed that bending moment and stress carrying capacity in inner and outer corners of joints were increased by increasing the biscuit size from 0 to 20 (increasing length and wide of biscuit). the lowest value of these resistance observed in 0 size biscuit. the results also showed that joints made with beech were superior to fir regarding to the measured properties in mdf and particleboards.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Nanotechnology in Wood-based Composite Panels

Wood is a naturally renewable material with both continuous and isolated pore systems. Wood-composite panels have the privilege of offering a homogeneous structure to be used as constructional and structural materials. However, its nature makes it susceptible to biological wood-deteriorating agents, water absorption and thickness swelling, fire, etc. Using nano-materials are very easy in the wo...

متن کامل

Nanotechnology in Wood-based Composite Panels

Wood is a naturally renewable material with both continuous and isolated pore systems. Wood-composite panels have the privilege of offering a homogeneous structure to be used as constructional and structural materials. However, its nature makes it susceptible to biological wood-deteriorating agents, water absorption and thickness swelling, fire, etc. Using nano-materials are very easy in the wo...

متن کامل

Comparison of Wood Composite Properties Using Cantilever-Beam Bending

Wood-based composite panels generally are first tested out-of-plane in the primary panel direction followed by the cross panel direction, but rarely edgewise. While most applications use wood-based composites in the flat-wise orientation and only need the out-of-plane properties, there are construction configurations where edgewise properties are needed for improved design configurations. A squ...

متن کامل

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023