applying digital image correlation method to measure flow field

نویسندگان

jui-chao kuo national cheng-kung university, tainan 701, taiwan

teng-yi kuo national cheng-kung university, tainan 701, taiwan

cheng-han wu national cheng-kung university, tainan 701, taiwan

shih-heng tung national university of kaohsiung, kaohsiung 811, taiwan

چکیده

in this study digital image correlation (dic) technique combined with a high speed video system was used to predict movement of particles in a water model. comparing with particle-image velocimetry (piv) technique, it provides a low cost alternative approach to visualize flow fields and was successfully employed to predict the movement of particles in a water model at different submergence depth using gas injection. as the submergence depth increases, the number of the exposed eye is reduced accordingly. at 26.4 cm submergence depth, an exposed eye was found at 1/3 of the submergence depth, whereas two exposed eyes were observed at 1/2 depth and near the bottom wall at 24 cm submergence depth.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Applying Digital Image Correlation to Biological Materials

Digital image correlation has become a common method for determining mechanical properties of rigid engineering materials. By comparing digital images of the material before and after deformation, strain and displacement response can be determined. In the current work, we expand this method for use on soft biological materials, in particular skin. Specifically, we show that digital image correl...

متن کامل

Improved Newton-Raphson digital image correlation method for full-field displacement and strain calculation.

The two-dimensional in-plane displacement and strain calculation problem through digital image processing methods has been studied extensively in the past three decades. Out of the various algorithms developed, the Newton-Raphson partial differential correction method performs the best quality wise and is the most widely used in practical applications despite its higher computational cost. The ...

متن کامل

Full-Field Indentation Damage Measurement Using Digital Image Correlation

A novel approach based on full-field indentation measurements to characterize and quantify the effect of contact in thin plates is presented. The proposed method has been employed to evaluate the indentation damage generated in the presence of bending deformation, resulting from the contact between a thin plate and a rigid sphere. For this purpose, the 3D Digital Image Correlation (3D-DIC) tech...

متن کامل

Full-field bulge testing using global digital image correlation

The miniature bulge test is an acknowledged method for characterizing freestanding thin films. Nevertheless, some discrepancies in the quantitative results from such tests can be found in literature, explained in part by erroneous assumptions in the analytical description used to compute the global stress and strain from the membrane pressure and deflection. In this research, a new method is pr...

متن کامل

Material Flow Analysis in Indentation by Two-Dimensional Digital Image Correlation and Finite Elements Method

The present work shows the material flow analysis in indentation by the numerical two dimensional Finite Elements (FEM) method and the experimental two-dimensional Digital Image Correlation (DIC) method. To achieve deep indentation without cracking, a ductile material, 99% tin, is used. The results obtained from the DIC technique depend predominantly on the pattern conferred to the samples. Due...

متن کامل

Stress Field Analysis of V-Notches with Tip Cracks in a Polymer Material Using Digital Image Correlation

In this study, displacement field around v-notches of a poly methyl metha crylate (PMMA) specimen with tip cracks will be analyzed using digital image correlation technique. First intensity factor in combination with in-plane rigid body translations and rotation components will be determined by linear least squares fitting of the displacement field data to the corresponding relations among stre...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
international journal of civil engineering

جلد ۱۲، شماره ۲، صفحات ۲۷۰-۲۷۵

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023