finite element simulation of c.v. joint forging of prid using arbitrary lagrangian-eulerian method
نویسندگان
چکیده
one of the most important parts of power transmission in automotives is c.v. joint, which consists of four components where exterior bowl is one of them. due to its complexity, and importance in automobile and existence of high stresses, forging process is the only cost effective method of production. hence, the best method of production of this part is forging process. the exterior part of c.v. joint is produced through two subsequent stages. first, forward extrusion is applied followed by backward extrusion. in this research hot forward and backward extrusion of c.v. joint of praid with pre-heating while heat loss has taken into account, were simulated using finite element method. the arbitrary lagrangian-eulerian method was employed to improve element distortions. dies were considered as solid and elastic to investigate the thermal interactions of dies and the work piece. deformation behavior, die contact pressure and punch force have been discussed by using the numerical results. force diagrams during forging process according to die displacement and related results are discussed. numerical results are compared with theoretical results for validation, meanwhile the comparison results are in good agreement.
منابع مشابه
Dynamic Fracture Analysis Using an Uncoupled Arbitrary Lagrangian Eulerian Finite Element Formulation
This paper deals with the implementation of an efficient Arbitrary Lagrangian Eulerian (ALE) formulation for the three dimensional finite element modeling of mode I self-similar dynamic fracture process. Contrary to the remeshing technique, the presented algorithm can continuously advance the crack with the one mesh topology. The uncoupled approach is employed to treat the equations. So, each t...
متن کاملAn Arbitrary Lagrangian-eulerian Finite Element Method for Cone-cap Plasticity; Application to Powder Compaction Simulation
The compaction forming of metal powder is a process involving large deformations, large strain, non-linear material behavior and friction. Consequently, the numerical analysis of such a highly non-linear process is a formidable computational problem. In this paper, an ALE technique is presented based on a generalized cap plasticity model in simulation of powder forming processes. In ALE formula...
متن کاملNumerical modelling of 3-D hard turning using Arbitrary Eulerian Lagrangian finite element method
In this paper, 3-D Finite Element Method (FEM) based numerical modelling of precision hard turning has been studied to investigate the effects of chamfered edge geometry on tool forces, temperatures and stresses in machining of AISI 52100 steel using low-grade polycrystalline cubic boron nitrite (PCBN) inserts. An Arbitrary Lagrangian Eulerian (ALE) based numerical modelling is employed for 3-D...
متن کاملNumerical modelling of 3D hard turning using arbitrary Lagrangian Eulerian finite element method
In this paper, 3D Finite Element Method (FEM)-based numerical modelling of precision hard turning has been studied to investigate the effects of chamfered edge geometry on tool forces, temperatures and stresses in machining of AISI 52100 steel using low-grade Polycrystalline Cubic Boron Nitrite (PCBN) inserts. An Arbitrary Lagrangian Eulerian (ALE)-based numerical modelling is employed for 3D p...
متن کاملbuckling of viscoelastic composite plates using the finite strip method
در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....
Arbitrary Lagrangian-Eulerian finite-element method for computation of two-phase flows with soluble surfactants
Article history: Received 20 September 2010 Received in revised form 3 January 2012 Accepted 13 January 2012 Available online 1 February 2012
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
international journal of advanced design and manufacturing technologyجلد ۳، شماره ۴، صفحات ۶۱-۷۰
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023