response surface methodology in spectrophotometric determination of formaldehyde using ch romotropic acid
نویسندگان
چکیده
formaldehyde in small quantities is commonly analyzed by spectrophotometric methods. one of the most-commonly used spectrophotometric techniques for this purpose is based on the reaction with chromotropic acid. because of its simplicity, sensitivity, selectivity and its low cost, it is still widely used. investigations for replacing the concentrated sulfuric acid with other acids or using more dilute solutions of sulfuric acid have been performed. herein, spectrophotometric determination of formaldehyde by chromotropic acid in the sulfuric acid medium is explored and modified by response surface methodology. the reaction was monitored by measuring the absorbance of the product at 574 nm. the factors affecting the response, i.e. concentration of sulfuric acid and concentration of chromotropic acid, were explored and optimized using response surface methodology. the calibration curve was linear in the range of 0.03-7.00 mg l-1 with detection limit of 0.005 mg l-1. the method was found to be sensitive, selective and was applied to determine the formaldehyde in toothpaste, clothing softener and acetic acid samples with satisfactory results.
منابع مشابه
Response Surface Methodology in Spectrophotometric Determination of Formaldehyde Using Ch romotropic Acid
Formaldehyde in small quantities is commonly analyzed by spectrophotometric methods. One of the most-commonly used spectrophotometric techniques for this purpose is based on the reaction with chromotropic acid. Because of its simplicity, sensitivity, selectivity and its low cost, it is still widely used. Investigations for replacing the concentrated sulfuric acid with other acids or using more ...
متن کاملIron leaching from bauxite ore in hydrochloric acid using response surface methodology
In this work, hydrochloric acid is used to remove iron impurities in the bauxite ore contained in the diasporite mineral located in the Sari region. The bauxite ore was calcined at different temperatures and times, and then dissolved in a hydrochloric acid solution. After determining the optimum calcination conditions in 1 h at 900 °C, the response surface methodology (RSM) with four factors in...
متن کاملpreparation and characterization of new co-fe and fe-mn nano catalysts using resol phenolic resin and response surface methodology study for fischer-tropsch synthesis
کاتالیزورهای co-fe-resol/sio2و fe-mn-resol/sio2 با استفاده از روش ساده و ارزان قیمت همرسوبی تهیه شدند. از رزین پلیمری resol در فرآیند تهیه کاتالیزور استفاده شد.
Photocatalytic Removal of Amaranth Optimization Using Response Surface Methodology
Since Amaranth (AM) is one of the dye compounds which is harmful to human’s life its removal from industrial waste water would reduce their environmental impact and health effect. Copper nanoparticle (CuNP) is a simple and eco-friendly material which can be used to remove this pollutant. In this paper, copper nanoparticles were synthesized, for removal of AM dye. The experiments were designed b...
متن کاملValidated UV-Vis Spectrophotometric Method for Determination of Gabapentin using Acetyl Acetone and Formaldehyde Reagents
Gabapentin is an anticonvulsant widely used in the treatment of epilepsy.An accurate and validated spectrophotometric method was developed as an alternative method to determine gabapentin in pharmaceutical products. This is a simple, accurate, precise, selective and visible spectrophotometric method. The method is based on the measurement of drug absorbance as a result of yellow solution format...
متن کاملAnalysis of Strain Inhomogeneity in Vortex Extrusion using Finite Element Method and Response Surface Methodology
The effect of geometrical parameters involved in vortex extrusion (VE) die design, on AA1050 aluminium alloy processed by VE were investigated using finite element analysis (FEA) and response surface methodology (RSM). For this, VE die length (L), reduction in area (RA), twist angle , and position of control points in Beziers' formulation (C1) were considered as input parameters and strain inho...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
analytical and bioanalytical chemistry researchجلد ۳، شماره ۲، صفحات ۱۴۹-۱۵۷
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023