design and manufacture of clutch pedal linkage with clutch cable
نویسندگان
چکیده
an interface part is used between clutch pedal and clutch cable in peugeot, samand, rd and peugeot pars. this part is consisted of two pieces. the main body is made of polyamide 6.6 and the second part is made of ck45.due to the fact that the two pieces are made of different assembling geometry with respect to each other, therefore, has caused performance problems which may result in clutch cable failure. thus, a new interface part is designed in such a way that has a better assembling geometry and has overcome the previous problems and improved part functionality.
منابع مشابه
Clutch-to-clutch Shift Control of an Automatic Transmission with Proportional Pressure Control Valves
For a new kind of automatic transmissions using proportional pressure valves to control the clutches directly, a two-degree-of-freedom controller is designed for clutch slip control during the inertia phase of the shift process. The controller is designed based on a low order linear model which is derived from dynamics of the proportional pressure control valve and the vehicle drive line. The f...
متن کاملDriveline modeling and estimation of individual clutch torque during gear shifts for dual clutch transmission
The purpose of the proposed work centers on the unprecedented task of accurately estimating the torque transmitted through each clutch of the dual clutch transmission. This is to possibly improve the clutch control performance during vehicle launch and gearshifts and to elongate the clutch life. Such goal is attained by only using the measurements and data that are already available in current ...
متن کاملDesign of a Clutch–Spring Knee Exoskeleton for Running
Because the leg is known to exhibit springlike behavior during the stance phase of running, several exoskeletons have attempted to place external springs in parallel with some or all of the leg during stance, but these designs have failed to permit natural kinematics during swing. To this end, a parallel-elastic exoskeleton is presented that introduces a clutch to disengage the parallel leg-spr...
متن کاملDesign of a mechanical clutch-based needle-insertion device.
Insertion of trocars, needles, and catheters into unintended tissues or tissue compartments results in hundreds of thousands of complications annually. Current methods for blood vessel cannulation or epidural, chest tube, and initial trocar placement often involve the blind pass of a needle through several layers of tissue and generally rely on distinguishable anatomic landmarks and a high degr...
متن کاملTesting the geometric clutch hypothesis.
The Geometric Clutch hypothesis is based on the premise that transverse forces (t-forces) acting on the outer doublets of the eukaryotic axoneme coordinate the action of the dynein motors to produce flagellar and ciliary beating. T-forces result from tension and compression on the outer doublets when a bend is present on the flagellum or cilium. The t-force acts to pry the doublets apart in an ...
متن کاملTesting small clutch size models with Daphnia.
Life-history theory predicts that for small clutches, variance in egg size (between individuals) should decrease in a predictable invariant manner as clutch size increases. To test this, we studied Daphnia magna at 350 different food treatments and recorded the number of eggs and the volume of each egg for their first clutch. As predicted, we found that the relationship between clutch size and ...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
international journal of advanced design and manufacturing technologyجلد ۱، شماره ۴، صفحات ۷۵-۸۴
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023