elasto-plastic analysis of thick walled tanks subjected to internal pressure

نویسندگان

abbas heydari

mohamadtaghi kazemi

چکیده

in this article, the elasto-plastic analysis of thick walled fg tanks subjected to internal pressure is elaborated. today, thick walled tanks containing liquids with high pressure are used in the chemical industries. the high internal pressure causes part of the thickness of reservoir to yield; therefore, we need the elasto-plastic analysis. in this study, elasto-plastic behavior of fg cylindrical and spherical vessels under internal pressure is studied. for comparison with fg tanks, elasto-plastic behavior of homogeneous tanks obtained. for this purpose, the assumption of ideal plastic behavior under axial symmetry conditions with using the tresca criterion for the spherical and cylindrical tanks made of al a359/sicp is used. power model is used for describe the gradual changes of mechanical properties in radial direction of fg material. it is shown that the analytically expressed results of the analysis of fg tanks after simplification coincide with homogeneous reservoirs. furthermore, the bearing capacity of internal pressure will be higher relative to the homogenous tanks.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Thermal Creep Analysis of Functionally Graded Thick-Walled Cylinder Subjected to Torsion and Internal and External Pressure

Safety analysis has been done for the torsion of a functionally graded thick-walled  circular cylinder under internal and external pressure subjected to thermal loading. In order to determine stresses the concept of Seth’s transition theory based on generalized principal strain measure has been used. This theory simplifies the set of mechanical equations by mentioning the order of the measure of...

متن کامل

Spreading of Plastic Zones in Functionally Graded Spherical Tanks Subjected to Internal Pressure and Temperature Gradient Combinations

Thermo-Elasto-Plastic analyses of thick-walled spherical tanks made of functionally graded materials are investigated analytically. These tanks are subjected to positive or negative temperature gradient and internal pressure loadings separately or simultaneously. The power law modeling has been used for through-the-thickness variation of mechanical properties. von Mises yield criterion and Elas...

متن کامل

Fluidity Onset Analysis in FG Thick-Walled Spherical Tanks under Concurrent Pressure Loading and Heat Gradient

In this paper,fluidity onset analysis in FG thick-walled spherical tanks under concurrent pressure loading and heat gradient has been presented. Designing thick-walled spherical tanks under pressure as tanks holding fluids under heat loads with high heat gradients require new approaches. Under high internal pressure and high temperature, the tank enters the plastic stage in a part of its thickn...

متن کامل

Semi Analytical Analysis of FGM Thick-Walled Cylindrical Pressure Vessel with Longitudinal Variation of Elastic Modulus under Internal Pressure

In this paper, a numerical analysis of stresses and displacements in FGM thick-walled cylindrical pressure vessel under internal pressure has been presented. The elastic modulus is assumed to be varying along the longitude of the pressure vessel with an exponential function continuously. The Poisson’s ratio is assumed to be constant. Whereas most of the previous studies about FGM thick-walled p...

متن کامل

spreading of plastic zones in functionally graded spherical tanks subjected to internal pressure and temperature gradient combinations

thermo-elasto-plastic analyses of thick-walled spherical tanks made of functionally graded materials are investigated analytically. these tanks are subjected to positive or negative temperature gradient and internal pressure loadings separately or simultaneously. the power law modeling has been used for through-the-thickness variation of mechanical properties. von mises yield criterion and elas...

متن کامل

Elasto-plastic solution for thick-walled spherical vessels with an inner FGM layer

Purely elastic, partially and fully plastic stress states in a thick-walled spherical pressure vessel with an inner functionally graded material (FG) coating subjected to internal and external pressures are developed analytically in this paper. The modulus of elasticity and the uniaxial yield limit of the FG coating layer are considered to vary nonlinearly through the thickness. Using Tresca’s ...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
international journal of advanced design and manufacturing technology

جلد ۳، شماره ۱، صفحات ۱۱-۱۸

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023