creep and creep-rupture characteristics of lead and sn70%-30% lead alloy
نویسندگان
چکیده
materials exhibit significant creep behavior at temperatures above 40% of their absolute melt temperature. lead, tin and their alloys are such materials which experience significant creep behavior in room temperature. one of the most important applications of the tin-lead alloys is soldering electronic circuits in electronic industry, and for lead are isolation walls and wet batteries. room temperature for lead is about 50% and for tin70%-lead30% is about 63% of their absolute melting temperature, and considering creep damage during their structural design is of prime importance. in this paper, creep and creep rupture data of these two materials are investigated experimentally. diagrams obtained from experiment in the applied form, are presented for the application in computer simulation and forecasting connections life cycle. creep rupture diagrams in the form of time hardening in the creep primary stage are presented to give strain-time relation and larson-miller and monkam-grant parameters. the steady state creep rate relation for both materials in terms of stress function is also provided.
منابع مشابه
Transformation-Induced Creep and Creep Recovery of Shape Memory Alloy
If the shape memory alloy is subjected to the subloop loading under the stress-controlled condition, creep and creep recovery can appear based on the martensitic transformation. In the design of shape memory alloy elements, these deformation properties are important since the deflection of shape memory alloy elements can change under constant stress. The conditions for the progress of the marte...
متن کاملCreep and Creep–Rupture Behavior of Wood-Based Structural Panels
This paper summarizes a cooperative research program between the USDA Forest Service, Forest Products Laboratory (FPL), in Madison, Wisconsin, and Forintek Canada Corp. in Vancouver, British Columbia, Canada. This research program provided detailed creep–rupture and some creep information for composite panel products. Commercially produced plywood, oriented strandboard (OSB), and minimally alig...
متن کاملConcurrent electromigration and creep in lead-free solder
When electric current flows in a solder bump, electromigration generates stress, but creep relaxes it. After some time, the bump develops a steady-state stress field. We present a theory to show that the two processes — electromigration and creep — set an intrinsic length. When the intrinsic length is large compared to the height of the bump, electromigration is fast relative to creep and the s...
متن کاملReview of creep cavitation and rupture of low Cr alloy and its weldment
This paper presents a review of creep cavitation and rupture of low Cr alloy and its weldment, particular in the heat-affected zone (HAZ). Creep damage is one of the serious problems for the high temperature industry. One of the computational approaches is continuum damage mechanics which has been developed and applied complementary to the experimental approach and assists in the safe operation...
متن کاملPrecipitate Redistribution During Creep of Alloy 617
Nickel-based superalloys are being considered for applications within advanced nuclear power generation systems due to their high temperature strength and corrosion resistance. Alloy 617, a candidate for use in heat exchangers, derives its strength from both solid solution strengthening and the precipitation of carbide particles. However, during creep, carbides that are supposed to retard grain...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
international journal of advanced design and manufacturing technologyجلد ۳، شماره ۳، صفحات ۶۳-۶۹
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023