extracting lateral transfer function of a remotely piloted helicopter by system identification method using 3-dof test stand
نویسندگان
چکیده
at the beginning of this paper, design and manufacturing stages of the 3 degree of freedom test stand for a remotely piloted helicopter is described, in which the helicopter is able to rotate about its three primary accesses. in the next parts the dynamical model of the rph in the yaw channel is presented and lateral transfer function of rph (yaw channel) is extracted by performing several tests and gathering dynamical data. least square method is used for system identification and finally results validation would be possible through comparison between simulated behavior of the rph and experimental data of the test stand.
منابع مشابه
Remotely-Piloted Helicopter Citrus Yield Map Estimation
A remotely-piloted Gas Xcell mini-helicopter with GPS, wireless Ethernet, and a machine vision system was flown over orange trees to take overhead images. The individual tree images The authors are solely responsible for the content of this technical presentation. The technical presentation does not necessarily reflect the official position of the American Society of Agricultural and Biological...
متن کاملReliability Analysis, Design Improvements and Maintenance Procedure Compilation of a Novel Remotely Piloted Helicopter
In the present paper, a complete process from reliability evaluation to design modification is proposed and also applied to a newly designed and manufactured Remotely Piloted Helicopter (RPH) by the authors. First of all, a description of all platform subsystems is presented. After that, function diagram and also product tree of the whole system is depicted for further analysis. Then, the relia...
متن کاملBenchmark model of Quanser’s 3 DOF Helicopter
This paper proposes a software benchmark tool for the Quanser “3 DOF Helicopter” in the Mathworks Simscape environment, based on a multi-body model of the experimental setup. The proposed benchmark tool takes into account a number of implementation features of the experimental setup and aims at providing a tool for simulative validation and performance analysis of control strategies. Along with...
متن کاملModal Analysis Turboshaft Test Stand Motor Designed by Using ANSYS
Today, modeling is critical for cognition and analysis of designers in industry field to meet their needs and design based on design requirements and available facilities to accelerate production and development of components of industrial engines. In this study, one structure has been proposed, designed, and analyzed based on turboshaft marine engine type to test this kind of engine in order t...
متن کاملA 6 DoF Visual Tracking System for a Miniature Helicopter
This paper presents a low-cost 6 Degrees-of-Freedom (6 DoF) visual tracking technique and its system for a small indoor rotary-wing Unmanned Aerial Vehicle (UAV) using three onboard LEDs and a single on-ground camera. The ellipse formed by the cyan LEDs on the blades and the red LED in the captured image are utilised for pose estimation. The developed system successfully implements the proposed...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
international journal of advanced design and manufacturing technologyجلد ۴، شماره ۲، صفحات ۱-۱۰
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023