aging influence on charpy impact behavior of basalt fiber reinforced epoxy composites
نویسندگان
چکیده
changes in moisture content and temperature can perturb both stiffness and strength and as such the impact resistance of composite structures. in this paper, the pre-notched basalt fibre reinforced epoxy (bfre) composite specimens are studied under charpy impact loads in order to investigate the changes in impact energy absorption (fracture toughness) with different kinds of aging conditions. to create three types of aggressive environmental conditions, the specimens were frozen in dried air at t= -18 °c, frozen in tap water at t= -18 °c and kept in tap water at t= 30 °c and the results were compared with the specimen without aging influence (t= 25 °c). water used for this examination has a high percentage of precipitation (70-80%) which causes high corrosion and consequent decrease in mechanical properties. the outcomes illustrated that the long-term exposure to tap water (t= 30 °c), dried air (t= -18 °c) and frozen in tap water (t= -18 °c) were all affected on energy absorption of bfre composites, however, freezing effect in water was more intense. to study the nature of the failure mechanisms, all failed specimens were inspected by scanning electron microscopy (sem) photographs.
منابع مشابه
Creep Behavior of Basalt and Glass Fiber Reinforced Epoxy Composites
The creep behavior of basalt fiber reinforced epoxy (BFRE) and glass fiber reinforced epoxy (GFRE) composites was studied through tensile testing at high temperature. To study the effect of reinforcing epoxy, the micro glass powder (MGP) was added at various volume percentage into the epoxy resin in BFRE composites. The initial strain for all the specimens were evaluated and compared with each ...
متن کاملAccelerated Heat Aging Study of Phenolic/Basalt Fiber Reinforced Composites
One of the greatest impediments to use polymer-matrix composites is their susceptibility to degradation when exposed to the elevated temperatures and the limited knowledge on the thermal and mechanical properties of these composites at such temperatures. The objective of this study is to evaluate the effects of accelerated heat aging on the tensile properties of the Woven Basalt/Phenolic (WBP) ...
متن کاملcreep behavior of basalt and glass fiber reinforced epoxy composites
the creep behavior of basalt fiber reinforced epoxy (bfre) and glass fiber reinforced epoxy (gfre) composites was studied through tensile testing at high temperature. to study the effect of reinforcing epoxy, the micro glass powder (mgp) was added at various volume percentage into the epoxy resin in bfre composites. the initial strain for all the specimens were evaluated and compared with each ...
متن کاملImpact and Hardness Properties of Areca Fiber-Epoxy Reinforced Composites
Natural Fibers composites are considered to have potential use as reinforcing material in polymer matrix composites because of their good strength, stiffness, low cost, environmental friendly and biodegradable. In present study, mechanical properties for natural fiber composites were evaluated. Here, areca fiber is used as new natural fiber reinforcement and epoxy resin as matrix. The extracted...
متن کاملFlexural behavior of carbon nanotube-modified epoxy/basalt composites
Copyright © Korean Carbon Society http://carbonlett.org Abstract The use of carbon nanotubes (CNTs) as a reinforcing material in a polymer matrix has increased in various industries. In this study, the flexural behavior of CNT-modified epoxy/ basalt (CNT/epoxy/basalt) composites is investigated. The effects of CNT modification with silane on the flexural properties of CNT/epoxy/basalt composite...
متن کاملAreca Fiber Reinforced Epoxy Composites: Effect of Chemical Treatments on Impact Strength
In this research work, impact strength of untreated, alkali treated, potassium permanganate treated, benzoyl chloride treated and acrylic acid treated areca fiber reinforced epoxy composites were studied under 40%, 50%, 60% and 70% fiber loadings. Impact strength increased with increase in fiber loading up to 60% and then showed a decline for all untreated and chemically treated areca fiber rei...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
international journal of advanced design and manufacturing technologyجلد ۶، شماره ۲، صفحات ۸۱-۸۵
کلمات کلیدی
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023