predictive modeling of surface roughness and material removal rate in turning of ud-gfrp composites using carbide (k10) tool

نویسندگان

surinder kumar

چکیده

this work presents an experimental investigation of the influence of the six important machining parameters (tool nose radius, tool rake angle, feed rate, cutting speed, cutting environment (dry, wet and cooled) and depth of cut) on surface roughness & material removal rate in the machining unidirectional glass fiber reinforced plastics (ud-gfrp) composite using carbide (k10) cutting tool during turning operation. orthogonal l 18 array in taguchi method was employed to carry out the experimental work. anova is performed for significant parameter and later regression model is developed for the significant parameters. validation (confirmatory) results indicate that the model is suitable for surface roughness & material removal rate during the study

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Prediction of Surface Roughness in Turning of Ud- Gfrp Using Mathematical Model and Simulated Annealing

Glass fiber reinforced plastic (GFRP) composite materials are a feasible alternative to engineering materials and are being extensively used in variety of engineering applications. Accordingly, the need for accurate machining of composites has increased enormously. During machining, the obtained surface roughness is an important aspect. The present investigation deals with the study and develop...

متن کامل

Prediction of Surface Roughness in Turning of Ud-gfrp Using Artifical Neural Network

The present investigation deals with the study and development of a surface roughness prediction model for the machining of unidirectional glass fiber reinforced plastics (UDGFRP) composite using Artificial Neural Network (ANN). The feed forward back propagation is used. Taguchi method (Orthogonal L16 array) is employed to carry out the experimental work. The process parameters selected for stu...

متن کامل

Experimental Study & Modeling of Surface Roughness in Turning of Hardened AISI 4340 Steel Using Coated Carbide Inserted

Turning of hardened steels using a single point cutting tool has replaced the cylindrical grinding now as it offers attractive benefits in terms of lower equipment costs, shorter set up time, fewer process setups, higher material removal rate, better surface quality and elimination of cutting fluids compared to cylindrical grinding. In order to obtain desired surface quality by machining, pr...

متن کامل

Optimization of surface roughness in turning of GFRP composites using genetic algorithm

Glass fiber reinforced polymer composites are finding its increased applications in variety of engineering applications such as aerospace, automobile, electronics and other industries. However, the users of FRP are facing difficulties to machine it, because of fiber delamination, fiber pull out, short tool life, matrix debonding and formation of powder like chips. The present investigation focu...

متن کامل

Predictive modeling of surface roughness and tool wear in hard turning using regression and neural networks

In machining of parts, surface quality is one of the most specified customer requirements. Major indication of surface quality on machined parts is surface roughness. Finish hard turning using Cubic Boron Nitride (CBN) tools allows manufacturers to simplify their processes and still achieve the desired surface roughness. There are various machining parameters have an effect on the surface rough...

متن کامل

A genetic algorithmic approach for optimization of surface roughness prediction model in turning using UD-GFRP composite

Machining of glass fiber reinforced plastic composite materials is an active area of research in current manufacturing processes. Achieving an improved surface finish is of high priority while machining the polymer based plastics composites due to the poor machinability of glass fibers. The present work deals with the study and development of a surface roughness prediction model for machining u...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
international journal of advanced design and manufacturing technology

جلد ۶، شماره ۲، صفحات ۳۷-۴۹

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023