experimental investigations of microstructure of al 1100 alloys welded by friction stir welding process

نویسندگان

vahiid zakeri teacher at azad university of tabriz

ahad gholipoor teacher at azad university of tabriz

parviz asadi teacher at azad university of tabriz

چکیده

in this paper, hardness and tensile properties of welded zone of aluminum 1100 alloys by friction stir welding process was investigated and the effects of rotational and traverse speeds of tool on these parameters was studied. also the fracture cross-section of welded samples was investigated. according the results of this paper, the hardness of weld material is higher than base material and is increased by decreasing the rate of rotational speed to traverse speed. the yields strength of weld material is 70% of base material in best conditions due to the weak thermo mechanically affected zone around weld nugget, although in some samples the tensile strength of weld material is equal to base material. also the sem images of fracture cross-section of welded samples showed a ductile fracture during tensile test.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

experimental study and modeling of friction stir welding process of aluminum 1100 alloys, using artificial neural network with taguchi method

in this paper, the temperature distribution in workpiece and microstructure of welded zone in friction stir welding of aluminum 1100 alloys and the effect of the tool rotational speed on these parameters have investigated experimentally. also feed forward back propagation neural network has been used to predict the temperature of the workpiece during the welding process by considering the proce...

متن کامل

Friction Stir Welding Process Optimization: Experimental Methods

Introduction The Friction Stir Welding (FSW) process is an innovative technique to join metals in the plasticity field, thus not reaching the melting temperature and consequently the liquid state as it happen in traditional welding processes. This feature of the FSW proved an enhancement of the fatigue behaviour and strength of the joints, leading some companies to adopt the process for the man...

متن کامل

The Strength of Friction Stir Welded and Friction Stir Processed Aluminium Alloys

Local strength of friction stir (FS) welds and FS processed aluminium alloys in heat treatable aluminium alloys is dominated by precipitation hardening. Strengthening due to stored dislocations is generally limited to 40MPa, and grain size strengthening is generally less than 10MPa. Local crystallographic texture can cause yield strength variation on the order of 5%. Published models for streng...

متن کامل

Experimental Investigations on Microstructural and Mechanical Behavior of Friction Stir Welded Aluminum Matrix Composite

The welding of materials by applying Friction Stir Welding technique is a new solid-state joining technique. The main advantage of this method compared to the traditional joining process is that it minimizes problem-related to metal resolidification as the method incorporates no melting phase. In this experimental work, the effect of friction stir welding (FSW) technique on the microstructu...

متن کامل

Friction stir welding of dissimilar alloys – a perspective

Friction stir welding does not involve bulk melting of the components that are joined. This has inspired attempts to exploit it for joining materials which differ in properties, chemical composition or structure, and where fusion can lead to detrimental reactions. The purpose of this special issue of Science and Technology of Welding and Joining was to assess the status of friction stir welding...

متن کامل

Liquation Cracking of Dissimilar Aluminum Alloys during Friction Stir Welding

A liquation cracking mechanism of dissimilar Al alloys during the friction stir welding (FSW) is suggested in this study. To identify the mechanism, the precipitates were analyzed and Al-Mg-Cu phase diagrams were calculated. Electron backscattering diffraction (EBSD) analysis and electron probe microanalysis (EPMA) were also conducted. In the same manner as constitutional liquation, at high hea...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
international journal of advanced design and manufacturing technology

جلد ۸، شماره ۳، صفحات ۰-۰

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023