numerical and analytical investigation of the sandwich sheet rolling process consideringcoulomb friction
نویسندگان
چکیده
sandwich sheet rolling process is investigated using an analytical method (slab method) and a numerical method (finite element method). the horizontal stress distribution in the layers, the rolling pressure along the contact interface and the neutral point between the roll and the sheet are investigated. then the affects of the parameters such as the friction between the sheet and the roll, shear yield stress ratio of the matrix and clad layers, front and back tensions on the rolling characteristics such as the pressure and neutral point position are studied. the results demonstrate that the finite element method results are very near to the slab method resultsand extra simplifying assumptions in the slab method cause low deviance in the results. in both methods as the friction coefficient increases, the rolling pressure increases and the neutral point nears the entrance of the roll gap. as the shear yield stress ratio increases, the rolling pressure increases but the neutral point doesn’t transmitted. as the front or back tensions is applied on the sandwich sheet, the rolling pressure decreases and the neutral point transmitted inverse of the tension direction.
منابع مشابه
An Upper Bound Analysis of Sandwich Sheet Rolling Process
In this research, flat rolling process of bonded sandwich sheets is investigated by the method of upper bound. A kinematically admissible velocity field is developed for a single layer sheet and is extended into the rolling of the symmetrical sandwich sheets. The internal, shear and frictional power terms are derived and they are used in the upper bound model. Through the analysis, the rolling ...
متن کاملAnalytical Modified Model of Cold Rolling Process and Investigation of the Effect of Work Roll Flattening on the Rolling Force
Cold rolling of steel is one of the most important metal forming processes so an accurate control of its parameters during the process is necessary. In this paper, the friction coefficient has been proposed as a function of cold rolling parameters such as forward slip, forward and backward tensile stresses ,strip thickness, static deformation, resistance of strip before and after rolling ,strip...
متن کاملAnalytical Modified Model of Cold Rolling Process and Investigation of the Effect of Work Roll Flattening on the Rolling Force
Cold rolling of steel is one of the most important metal forming processes so an accurate control of its parameters during the process is necessary. In this paper, the friction coefficient has been proposed as a function of cold rolling parameters such as forward slip, forward and backward tensile stresses ,strip thickness, static deformation, resistance of strip before and after rolling ,strip...
متن کاملNumerical and analytical investigation of an ultrasonic assisted ECAP process
One of the great challenges in the processing of materials using Equal Channel Angular Pressing (ECAP) is the high forming forces required to produce large shear deformation in the material. Researchers show that the friction forces between the die and the sample constitute a great part of the total forming forces. Recently, ultrasonic vibrations are successfully implemented into the ECAP proce...
متن کاملAnalytical and Numerical Investigation of Second Grade Magnetohydrodynamics Flow over a Permeable Stretching Sheet
In this paper, the steady laminar boundary layer flow of non-Newtonian second grade conducting fluid past a permeable stretching sheet, under the influence of a uniform magnetic field is studied. Three different methods are applied for solving the problem; numerical Finite Element Method (FEM), analytical Collocation Method (CM) and 4th order Runge-Kutta numerical method. The FlexPDE software p...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
international journal of advanced design and manufacturing technologyجلد ۸، شماره ۳، صفحات ۰-۰
کلمات کلیدی
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023