using an elastic, expandable sealant system for zonal isolation of maroon wells: a laboratory study

نویسندگان

hamid soltanian

i am working in ripi mohammad ataei

university of shahrood reza khalokakaie

university of shahrood ezatallah kazemzadeh

ripi

چکیده

an oil and gas well cementing in gachsaran formation, where sustained annular pressure has been reported in many wells, presents a big challenge in maroon field. the main challenges are preventing gas migration and achieving zonal isolation using a competent cement sealant system which is able to withstand downhole stresses and high temperatures during production cycles. unlike conventional cement systems, properties, such as, high poisson’s ratio and low young’s modulus compared to that of the rock were optimized in the new system to achieve mechanical resistance and durability. the use of elastic-expandable additives to solve problems in oil well cementing has been investigated in recent years by several research groups in the petroleum industry. this study includes the laboratory examination of the effect of an elastic-expandable additive on the physical properties of a new cement sealant system. in the research process, a candidate well was selected and the properties of the used cement slurry in a problematic section of the well were evaluated in the laboratory. then, the elastic-expandable additive was added as an elastic agent and the improvements in the cement slurry and stone properties were studied. this article discusses the problems associated with the conventional cement used in the candidate well and gives the detail of the improvements in cement properties obtained by adding the elastic-expandable additive to the cement slurry formulation as an elastic agent. the elastic-expandable additive increases the poisson’s ratio and expansion set cement, but it decreases the young’s modulus and fluid loss of the cement slurry. in addition, to prevent gas migration and achieve zonal isolation, there is an optimum concentration of the elastic-expandable additive at which the maximum compressive strength is reached. the results of this study can be used to optimize the cement slurry design in any given set of conditions.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Using an Elastic, Expandable Sealant System for Zonal Isolation of Maroon Wells: a Laboratory Study

An oil and gas well cementing in Gachsaran formation, where sustained annular pressure has been reported in many wells, presents a big challenge in Maroon field. The main challenges are preventing gas migration and achieving zonal isolation using a competent cement sealant system which is able to withstand downhole stresses and high temperatures during production cycles. Unlike conventional cem...

متن کامل

An Elastomer Additive Improving Elastic Properties of Heavy Weight Oil Well Cement: A Laboratory Study

The use of elastomer additives to solve the problems in oil well cementing has been investigated in recent years by several research groups in the petroleum industry. This study includes the laboratory examination of the effect of elastomer additives on the physical properties of heavy-weight oil well cement. In the research process, a candidate well is selected and the properties of the cement...

متن کامل

a study on thermodynamic models for simulation of 1,3 butadiene purification columns

attempts have been made to study the thermodynamic behavior of 1,3 butadiene purification columns with the aim of retrofitting those columns to more energy efficient separation schemes. 1,3 butadiene is purified in two columns in series through being separated from methyl acetylene and 1,2 butadiene in the first and second column respectively. comparisons have been made among different therm...

an application of fuzzy logic for car insurance underwriting

در ایران بیمه خودرو سهم بزرگی در صنعت بیمه دارد. تعیین حق بیمه مناسب و عادلانه نیازمند طبقه بندی خریداران بیمه نامه براساس خطرات احتمالی آنها است. عوامل ریسکی فراوانی می تواند بر این قیمت گذاری تاثیر بگذارد. طبقه بندی و تعیین میزان تاثیر گذاری هر عامل ریسکی بر قیمت گذاری بیمه خودرو پیچیدگی خاصی دارد. در این پایان نامه سعی در ارائه راهی جدید برای طبقه بندی عوامل ریسکی با استفاده از اصول و روش ها...

metrics for the detection of changed buildings in 3d old vector maps using als data (case study: isfahan city)

هدف از این تحقیق، ارزیابی و بهبود متریک های موجود جهت تایید صحت نقشه های قدیمی سه بعدی برداری با استفاده از ابر نقطه حاصل از لیزر اسکن جدید شهر اصفهان می باشد . بنابراین ابر نقطه حاصل از لیزر اسکنر با چگالی حدودا سه نقطه در هر متر مربع جهت شناسایی عوارض تغییر کرده در نقشه های قدیمی سه بعدی استفاده شده است. تمرکز ما در این تحقیق بر روی ساختمان به عنوان یکی از اصلی ترین عارضه های شهری می باشد. من...

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
journal of petroleum science and technology

جلد ۷، شماره ۱، صفحات ۱۳-۲۲

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023