a boundary integral model for simulating spilling breakers
نویسندگان
چکیده
a boundary integral method is used to simulate spilling breakers. the bottom is also included inthe introduced closed boundary and the problem is directly solved in the physical plane. the method has beenshown to be remarkably stable, and no numerical instability has occurred in any of the calculations. theresults reveal that both the momentum and total energy are almost constant in time during the simulationperiod. as a result, the breaking process of a spilling breaker is fairly well simulated.
منابع مشابه
The 3D Structure of Spilling Breakers
Nearly all calculations and measurements of breaking waves assume the wave profiles and flow fields are two-dimensional. Though this assumption may be correct before the waves become turbulent, once transition to turbulent flow begins, the real flow becomes highly three dimensional. The threedimensional structure and motion of the free surface is important for the dynamics of the breaking proce...
متن کاملA General Boundary-Integral Formulation for Zoned Three-Dimensional Media
A new boundary-integral formulation is proposed to analyze the heat transfer in zoned three-dimensional geometries. The proposed formulation couples the boundary formula, the gradient of the boundary formula, and the exterior formula. An advantage of this formulation over the traditional methods is that any linear condition at the interface between subdomains may be incorporated into the formul...
متن کاملTowards an Analytical Model for Film Cooling Prediction using Integral Turbulent Boundary layer
The objective of this work is to develop deep theoretical methods that are based on the solution of the integral boundary layer equations for investigating film cooling in liquid rocket engine. The integral model assumes that heat is transferred from hot free stream gas to the liquid film both by convection and radiation. The mass is transferred to the free srteam gas by the well-known blowing ...
متن کاملA novel boundary integral equation for surface crack model
A novel boundary integral equation (BIE) is developed for eddy-current nondestructive evaluation problems with surface crack under a uniform applied magnetic field. Once the field and its normal derivative are obtained for the structure in the absence of cracks, normal derivative of scattered field on the conductor surface can be calculated by solving this equation with the aid of method of mom...
متن کاملEvaluation of turbulence closure models under spilling and plunging breakers in the surf zone
Turbulence closure models are evaluated for application to spilling and plunging breakers in the surf zone using open source computational fluid dynamics software. A new library of turbulence models for application to multiphase flows has been developed and is assessed for numerical efficiency and accuracy by comparing against existing laboratory data for surface elevation, velocity and turbule...
متن کاملA Finite Element Model for Simulating Flow around a Well with Helically Symmetric Perforations
In a perforated well, fluids enter the wellbore through array of perforation tunnels. These perforations are typically distributed in a helical pattern around the wellbore. Available numerical models to simulate production flow into cased-and-perforated vertical wells have complicated boundary conditions or suffer from high computational costs. This paper presents a simple and at the same time ...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
iranian journal of science and technology (sciences)ISSN 1028-6276
دوره 31
شماره 2 2007
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023