optimization of turbulence mixing process in liquid to liquid mixers
نویسندگان
چکیده
0
منابع مشابه
A Study on Liquid-liquid Mixing in a Stirred Tank with a 6-Blade Rushton Turbine
The turbulent flow field generated in a baffled stirred tank was computed by large eddy simulation (LED) and the flow field was developed using the Sliding Mesh (SM) approach. In this CFD study, mixing times and power number have been determined for a vessel agitated by a 6-blade Rushton turbine. The predicted results were compared with the published experimental data. The satisfactory results ...
متن کاملaxial mixing in gas-liquid reactors
in this paper, the present state of knowledge about axial mixing in gasliquid reactors is reviewed. a brief outline of the methods for measuring residence time distribution(rtd)of various phases in a multiphase reactor is presented. this is followed by a short description of differential and stage-wise models for characterizing back mixing from rtd measurments. backmixing characteristics of som...
متن کاملWays to Optimize Solid-Liquid Mixing
This white paper presents a number of mixing technologies and techniques employed in solid dispersion and dissolution. The aim of this paper is to provide practical information on the efficient use of specialty mixing equipment for the preparation of low, medium and high viscosity solid-liquid mixtures under low and high shear conditions.
متن کاملEnthalpy of Mixing in Al-Tb Liquid
The liquid-phase enthalpy of mixing for Al–Tb alloys is measured for 3, 5, 8, 10, and 20 at% Tb at selected temperatures in the range from 1364 to 1439 K. Methods include isothermal solution calorimetry and isoperibolic electromagnetic levitation drop calorimetry. Mixing enthalpy is determined relative to the unmixed pure (Al and Tb) components. The required formation enthalpy for the Al3Tb pha...
متن کاملArea Tensors for Modeling Microstructure During Laminar Liquid-Liquid Mixing
Fluid-fluid mixtures often possess a fine structure, or morphology, whose length scale is much smaller than the length scale over which the flow field and morphology vary. We define a microstructural variable called the area tensor, which describes the local morphology of such mixtures through volume-averaged size, shape, and orientation characteristics. The area tensor is equivalent to the int...
متن کاملLiquid-Liquid Extraction of Gallium from Jajarm Bayer Process Liquor Using Kelex 100
The solvent extraction of gallium from a concentrated Jajarm Bayer process liquor containing 164.90 g/l of Na2O, 86.70 g/l of Al2O3 and 106.02 ppm of gallium was investigated using 10 vol.% Kelex100, a 7-alkyl substituted-8 hydroxyquinoline as an extractant, 10 vol.% etanol as a modifier and kerosene as a diluent. At (Vo :Va = 1.0:1.0) ...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
تحقیقات مکانیک کاربردیجلد ۳، شماره ۱، صفحات ۱۳-۱۸
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023