assembly performance of a gasketed bolted flanged pipe joint using different bolt tightening strategies
نویسندگان
چکیده
this paper presents the results of the assembly process of a gasketed bolted flanged pipe joint for two different bolt tightening strategies, i.e. asme and industrial using torque control of preload method. the final clamping force is achieved in four and five passes in asme and industrial strategy respectively. axial bolt stress variation, at the end of each pass, individual bolt bending behavior, gasket stress and flange stress variations for both strategies are discussed.
منابع مشابه
Bolted Connection Strength and Bolt Hole Size
This study investigated the effects of oversized bolt holes on the properties of bolted connections with steel side members. The intent of the study was to determine (1) how well the European Yield Model (EYM) predicts experimental results for connections with oversized bolt holes and (2) how the loaddeformation behavior of connections is affected by oversized and/or misdrilled holes. Variables...
متن کاملInvestigation on the Effect of Tigthening Torque on the Stress Distribution in Double Lap Simple Bolted and Hybrid (Bolted -Bonded) Joints
In this research, the effects of torque tightening on the stress distribution in double lap simple bolted and hybrid (bolted-bonded) joints have been investigated numerically. In order to determine the bolt clamping force value due to tightening torque in simple bolted and hybrid joints, which is necessary in numerical simulation, an experimental approach has been proposed. To do so, two kinds ...
متن کاملStudy of Bolt Load Loss in Bolted Aluminum Joints
Bolted joints are used widely in mechanical design and represent a weak link in a system where loss of joint clamping force can lead to degraded product performance or human injury. To meet current market demands, designers require reliable material data and analysis tools for their industry specific materials. The viscoelastic response of bolted aluminum joints used in the small die-cast engin...
متن کاملAnalysis of Gasketed-plate Heat Exchanger Performance Using Nanofluid
A heat exchanger using nanofluid needs to operate at optimum mass concentration level to get the maximum heat transfer performance. A numerical analysis is performed on the heat transfer and pressure drop of water-based γ-Al2O3 nanofluid gasketed-plate heat exchanger to specify its optimum conditions. Cold water will be heated by γ-Al2O3/water nanofluid. The results showed that optimal volume c...
متن کاملEvaluation of Fatigue Life Reduction Factors at Bolt Hole in Double Lap Bolted Joints Using Volumetric Method
In this research, the influence of bolt preload on the fatigue strength of 2024-T3 aluminium alloy double lap bolted joints has been studied experimentally and numerically. To do so, three sets of the specimens were prepared and each of them subjected to tightening torque of 1,2.5 and 5 N-m and then fatigue tests were conducted under various cyclic axial load levels. In the numerical method, th...
متن کاملFinite Element Analysis of Contact Stress in a Full-metallic Pipe Joint for Hydrogen Pipelines
Hydrogen gas has been widely recognized as an environmentally clean and renewable energy fuel, and it provides a way to reduce greenhouse gas and air pollution emission. A great deal of effort has been made to develop new techniques in the field of hydrogen energy, including hydrogen production, storage, and infrastructure. Recently a metallic gasket, which is made of type 316L stainless steel,...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
iranian journal of science and technology transactions of mechanical engineeringناشر: shiraz university
ISSN 2228-6187
دوره 39
شماره M1+ 2015
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023