smart starting of induction motor by changing core magnetic flux value

Smart Starting of Induction Motor by Changing Core Magnetic Flux Value

Single-phase squirrel cage and three-phase induction electromotors are the most popular electromotors used in industry from long ago. When an induction motor starts with direct connection method, it takes a lot of current from the power supply (several times the nominal current); so, several methods have been devised to start such electromotors. These methods either reduce the voltage of the st...

Starting Analysis of Induction Motor using SPWM

Induction motors are widely used in both household and industrial application due to their high torque to volume ratio, ruggedness, robustness and low maintenance. Induction motor draws a

Estimation of Induction Motor Speed by EKF In Stationary Frame and Use of Rotor Flux and Study of Parameter Variations

Estimation of Induction Motor Speed by EKF In Stationary Frame and Use of Rotor Flux and Study of Parameter Variations

Optimization of an HTS Induction/Synchronous Motor According to Changing of HTS Tapes Critical Current by Analytical Hierarchy Process

This paper represents the performance of a squirrel-cage High Temperature Superconducting Induction/ Synchronous Motor (HTS-ISM) based on nonlinear electrical equivalent circuit. The structure of the HTS-ISM is the same as that of the squirrel-cage type induction machine, and the secondary windings are fabricated by the use of the HTS wires. It has already been shown that based on the experimen...

Sliding Mode Flux Observer of Induction Motor

This paper deals with the sliding mode theory for direct torque and flux controlled (DTFC) induction motor drive. The aim of this paper is implementation of sliding mode theory for design of robust sensorless control of the drive with DTFC. This contribution describes proposed control and flux observer as well as presents simulation results and experimental evidence of the laboratory prototype ...