a radiative-advective model for estimation of nocturnal cooling in a basin surrounded by topography (rafsanjan basin)
نویسندگان
چکیده
in the nighttime, drainage flow occurs along the basin sideslope and advects cold air to the boundary layer over the basin bottom (bbl), intensifying the cooling rate of the layer. a nocturnal cold air lake develops in the basin, attaining a depth nearly equal to the topographical depth of the basin. heat budget analysis of the whole basin surface shows that net radiative flux closely balances with sensible heat flux and ground heat conduction. in the daytime, the bbl is warmed not only by sensible heat flux from the surface of the basin bottom, but also by local subsidence heating. this local subsidence above the basin bottom depresses development of the convective boundary layer until the nocturnal cold air lake vanishes completely. the subsidence velocity increases with time after sunrise. over the whole basin surface, net radiative flux closely balances with sensible and latent heat fluxes. cooling in an enclosed basin surrounded by topography, is a function of different factors and most notably the local processes of radiation and advection due to drainage flows. in this study, radiative cooling with an air parcel model for down-slope winds with zero latent heat flux assumption, are used to build a numerical scheme for estimating nocturnal cooling in such basin. the meteorological condition is assumed to be calm which is often the case for topographically surrounded basins for the area. the model requires a prescribed potential lapse rate during the night. for validation of the model the data of the aizu basin in japan with a good set of measurements is used. for typical model basins, the dependence of the nocturnal cooling on topographic parameters are obtained as follows: (i) the governing parameters are the depth of the basin and a shape parameter. the conical basin with a small shape parameter has more air cooling and a weaker slope wind than a flat bottom basin with a large shape parameter; (ii) mean sensible heat flux during the night is almost proportional to a cube root of the depth of the basin, but little affected by the shape parameter. sensitivity to radiational condition, the thermal constant of the ground, and surface roughness are also examined in this study. the results show that for a conical shaped surrounding the temperature drop during the night is more than a case with bowel like shape with the same depth. also as the depth of the basin increases this temperature drop is large. also dryer surface of the basin leads to larger radiative cooling and hence lower temperature in comparison to the wetter case. it is also found that the slope of the surrounding slopes does not affect the cooling rate as long as the depth of the basin is kept constant. the results of the model also show that often (> 65% of the times) the morning temperature of the basin surface can reach zero degrees centigrade if the evening temperature is about 9.5 degrees centigrade or less. thai can be used to issue warnings to farmers in such areas in order to avoid frost damage to crops. the model is used for rafsanjan city to predict nocturnal temperature drop in spring seasons. this area with vast pestasous farms is prone to frost damage in spring time.
منابع مشابه
investigating the feasibility of a proposed model for geometric design of deployable arch structures
deployable scissor type structures are composed of the so-called scissor-like elements (sles), which are connected to each other at an intermediate point through a pivotal connection and allow them to be folded into a compact bundle for storage or transport. several sles are connected to each other in order to form units with regular polygonal plan views. the sides and radii of the polygons are...
a study on insurer solvency by panel data model: the case of iranian insurance market
the aim of this thesis is an approach for assessing insurer’s solvency for iranian insurance companies. we use of economic data with both time series and cross-sectional variation, thus by using the panel data model will survey the insurer solvency.
A GIS-aided resource estimation of coalfields in Kangal basin, Sivas province, Turkey
This paper presents the procedures used for determining and defining the tonnage and grade of the coalfields of Kangal basin from the developed GIS-aided block model. In this work, firstly, all the lithological logs of drill holes and chemical analysis data of core in the basin were analyzed with the help of geostatistics, and then the digital raster maps of each one of the attributes such as t...
متن کاملEstimation of erosin and sediment yield with EPM model in Zemkan basin using GIS
The goal of this study is determination of erosion rate and sediment production and exploring sensitive areas of erosion in Zemkan basin, located in the West of Kermanshah Province.To achieve these objectives, the erosion potential method (EPM) was used.Geographical information system also was used to reduce the errors and increase the relative accuracy in the analysis of the model. Required da...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
فیزیک زمین و فضاجلد ۳۹، شماره ۲، صفحات ۱۱۱-۱۲۶
کلمات کلیدی
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023