an observation on metallurgical factors affecting hydrogen and sulfide induced stress cracking of pipeline steels

Factors Affecting Ruminal Hydrogen Sulfide Concentration of Cattle

and Implications Ruminal hydrogen sulfide concentrations may be a useful tool to determine risk of cattle developing sulfurinduced polioencephalomalacia. In this study, steers were fed a low sulfur (0.2% S) or a high sulfur diet (0.7% S) and ruminal hydrogen sulfide concentrations were measured. Although differences in ruminal hydrogen sulfide due to sulfur intake were maintained throughout the...

A Comparison of Hydrogen Embrittlement and Stress Corrosion Cracking in High Strength Steels

The purpose of this study was to compare the known behavior of hydrogen embrittled high-strength steel to the characteristics of environmentallyinduced stress corrosion failure where hydrogen is continuously generated at the specimen surface. The incubation time for the initiation of slow crack growth was accelerated by prestressing for a fixed time below the lower critical limit. These results...

Characteristics of Hydrogen Embrittlement, Stress Corrosion Cracking and Tempered Martensite Embrittlement in High-strength Steels

Characteristics of tempered martensite embrittlement (TME), hydrogen embrittlement (HE), and stress corrosion cracking (SCC) in high-strength steels are reviewed. Often, it is important to determine unambiguously by which of these mechanisms failure occurred, in order to suggest the right actions to prevent failure recurrence. To this aim, samples made of high-strength AISI 4340 alloy steel wer...

an investigation on influencing factors on tourists shopping attitude of iranian handmade carpet in isfahan

چکیده ندارد.

Assessment of Stress Corrosion Cracking on Pipeline Steels Weldments Used in the Petroleum Industry by Slow Strain Rate Tests

The Effect of Hydrogen Content and Welding Conditions on the Hydrogen Induced Cracking of the API X70 Steel Weld

In this study, first,diffusible hydrogen of cellulosic electrode E8010-P1 and low hydrogen electrode E8018-G was measured by mercury displacement method according to ISO3690. Then,the effect of preheating and post-heating on the sensitivity to hydrogen inducedcold cracking in welding of 18mm API5L X70 steel with these electrodes was investigated according to ISO17642-2. The results of visual in...