the effects of dynamic voltage restorer (dvr) on the voltage sag and swell improvement of distribution system in harmonic conditions (technical note)

نویسندگان

آرش تعویقی

دانشگاه تهران سعید افشارنیا

دانشگاه تهران حسن منصف

دانشگاه تهران

چکیده

today, with attention to increase in sensitive electrical equipments application in distribution networks and their susceptibility to the power quality deficiencies, the protection necessity of sensitive loads against undesirable effects of these disturbances are in focus. so, in this paper voltage sag deficiency and dynamic voltage restorer (dvr) would be introduced as the most prevalent power quality problems and most effective voltage sag’s compensators, respectively. continuously, different parts of dvr structure would be discussed in which control system would be taken into account as the most important part. in this part, after different compensation strategies analysis and with attention to great importance of compensator response in sensitive load protection against the duration of voltage sag, various voltage estimation algorithms would be introduced. afterwards a novel estimation algorithm would be proposed which has the desirable accuracy and less delay among the mentioned ones. then a proposed control system based on the proposed algorithm in the fault detection system and pre-fault based symmetrical component strategy would be introduced. finally the effects of the novel system on asymmetrical voltage sag and swell of the distribution system improvement would be simulated in matlab/simulink.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Mitigation of voltage sag/swell using Dynamic voltage restorer (DVR)

The most noticeable topic for electrical engineering is power quality in recent year. Power quality problem is an occurrence manifested as a nonstandard voltage, current or frequency. Utility distribution networks, sensitive industrial load and critical commercial operation suffer from various types of outages and service interruption can cost significant financial losses. One of the major prob...

متن کامل

The Effectiveness of Dynamic Voltage Restorer with the Distribution Networks for Voltage Sag Compensation

This paper discusses the Dynamic voltage restorer (DVR) operation and control for Voltage sags compensation. DVR is a series connected power electronic based device that can quickly mitigate the voltage sags in the system and restore the load voltage to the pre-fault value. Voltage sag associated with faults in transmission and distribution systems, energizing of transformers, and starting of l...

متن کامل

Effective Controller Design for the Dynamic Voltage Restorer (DVR) for Voltage Sag Mitigation in Distribution Utilities

The voltage sag detection algorithm and control algorithm synthesis of the dynamic voltage restorer (DVR) are proposed. The double synchronous reference frame phase-locked loop (DSRF-PLL) is applied for the voltage sag detection, which is able to calculate the phase angle of the positive-sequence fundamental component of grid voltages even under unbalanced and distorted grid voltages. The effec...

متن کامل

An Enhancement Method for the Compensation of Voltage Sag / Swell and Harmonics by Dynamic Voltage Restorer

Now a days, the problem of voltage sags and Swells create a severe impact on sensitive loads in industries . Due to which load shedding and over voltages might occur. Several custom power devices can be used to overcome this problem. Of these power devices Dynamic Voltage Restorer (DVR) is one of the most reliable and efficient custom power devices used in power distribution network. This paper...

متن کامل

Voltage Disturbances Mitigation in Low Voltage Distribution System Using New Configuration of Dynamic Voltage Restorer (DVR)

This paper discusses the design and development of Dynamic Voltage Restorer (DVR) controller for voltage unbalanced compensation using d-q-o transformation technique. The controller in d-q-o coordinates has better performance than conventional controllers. The controlled variables in d-q-o coordinates are then inversely transformed to the original voltages which produced reference voltages to a...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
نشریه دانشکده فنی

جلد ۴۳، شماره ۵، صفحات ۶۱۱-۶۱۷

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023