optimal torque control of pmsg-based stand-alone wind turbine with energy storage system

نویسندگان
چکیده

in this paper optimal torque control (otc) of stand-alone variable-speed small-scale wind turbine equipped with a permanent magnet synchronous generator and a switch- mode rectifier is presented. it is shown that with otc method in standalone configuration, power coefficient could be reached to its maximum possible value, i.e. 0.48. an appropriate control algorithm based on turbine characteristic is designed to extract maximum power from the turbine within a whole range of wind speed changes. besides, energy storage devices (battery bank) are used to ensure continuous supplying loads and power quality. the ac loads are connected to the system via a single-phase inverter as domestic appliances. dynamic stability of the system is also investigated to have a complete surveillance on the system operation in the conditions of hard wind speeds and maximum loads demand. the presented control method, and the other components of the system are modeled in matlab/simulink environment. simulation results show the good performance of the presented wind system in all case studies as well as active power balance.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Optimal Torque Control of PMSG-based Stand-Alone Wind Turbine with Energy Storage System

In this paper optimal torque control (OTC) of stand-alone variable-speed small-scale wind turbine equipped with a permanent magnet synchronous generator and a switch- mode rectifier is presented. It is shown that with OTC method in standalone configuration, power coefficient could be reached to its maximum possible value, i.e. 0.48. An appropriate control algorithm based on turbine characterist...

متن کامل

PMSG Based Stand Alone Wind Power System with Sensorless MPPT

In this paper, analyzing the operation of a Permanent Magnet Synchronous Generator (PMSG) based stand alone wind power system with Sensorless Maximum Power Point Tracking (MPPT) and a system for storing energy during wind speed and load variations. In standalone system, power, balance and power quality require the energy storage system. In conventional systems, MPPT depends on wind turbine para...

متن کامل

Energy Storage for a Stand-alone Wind Energy Conversion System

This paper deals with a wind-based stand-alone generating unit with Permanent Magnet Synchronous Generator (PMSG) and a Lead Acid Battery (LAB) for energy storage, during wind speed variation as well as transient performance under variable load. The main purpose is to supply 230 V/50 Hz domestic appliances through a single-phase inverter. Simulations and experimental results validate the stabil...

متن کامل

Optimal Sizing of a Reliable Hydrogen-based Stand-alone Wind-Fuel Cell System

A hybrid wind/ fuel cell generation system is designed to supply power demand. The aim of this design is to minimize the total cost of the hybrid system over an expected 20 years of operation. The optimization problem is solved aimed at providing a reliable supply for the consumer’s demand. The system consists of fuel cells, some wind units, some electrolyzers, a reformer, an anaerobic reactor ...

متن کامل

Voltage control of stand-alone wind and solar energy system

In this paper wind and solar based stand-alone hybrid energy system is presented for the remote area power system applications. The wind, solar, battery, fuel cell and dump load (i.e., aqua-electrolyzer) are connected to the common dc bus. An ac load is connected to dc bus through a pulse width modulation (PWM) based inverter. Ac voltage at load bus can be maintained at rated value by regulatin...

متن کامل

Predictive Voltage Control of Stand Alone Wind Energy Conversion System

– This paper investigates the application of the model predictive control (MPC) approach to control the voltage and frequency of a stand alone wind generation system. This scheme consists of a wind turbine which drives an induction generator feeding an isolated load. A static reactive power compensator (SVAR) is connected at the induction generator terminals to regulate the load voltage. The ro...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
journal of electric power and energy conversion systems

جلد ۱، شماره ۲، صفحات ۵۲-۵۹

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023