development of new potassium carbonate sorbent for co2 capture under real flue gas conditions

Development of New Potassium Carbonate Sorbent for CO2 Capture under Real Flue Gas Conditions

In this paper, the development of a new potassium carbonateon alumina support sorbent prepared by impregnating K2CO3 with an industrial grade of Al2O3 support was investigated. The CO2 capture capacity was measured using real flue gas with 8% CO2 and 12% H2O in a fixed-bed reactor at a temperature of 65 °C using breakthrough curves. The developed sorbent showed an adsorption capacity of 66.2 mg...

Flue gas treatment for CO2 capture

This report is in two sections: the first describes the flue gas and its treatment in post-combustion capture and the second covers the flue gas in oxyfuel combustion capture. The main components of the flue gas in pulverised coal combustion for postcombustion capture are CO2, N2, O2 and H2O, and air pollutants such as SOx, NOx, particulates, HCl, HF, mercury as well as other contaminants. The ...

CO2 Capture from Flue Gas by Phase Transitional Absorption

Development of a Pressure Swing Adsorption (PSA) Process for CO2 Capture from Flue Gas

A computational investigation on the structural features of alkanolamine solvents for CO2 capture process from power plant flue gas

Development of Fly Ash Derived Sorbents to Capture Co2 from Flue Gas of Power Plants

DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, herein to any specific commercial produ...