optimization of thermomechanical parameters to produce an ultra-high strength compressor disk
نویسندگان
چکیده
structural steels with very high strength levels are often referred to as ultrahigh-strength steels (uhss). the usage of uhss has been extensively studied in aerospace industries and offshore platforms. in this study, medium carbon low alloy steel (ams6305) was thermomechanicaly treated to obtain an ultra-high strength bainitic steel for aircraft engine compressor disk. a novel themomechanical treatment was introduced to optimize microstructure and mechanical properties. by replacing the common quench-temper microstructure of compressor disk with bainite microstructure, an ultra-high strength bainitic steel was achieved. based on the results obtained, the final microstructures following pre-deformation and subsequent heat treatment showed a very good combination of strength and toughness. furthermore, it has been shown that austempering time and temperature play a major role in achieving ultra-high strength bainitic steels. the optimized strength and toughness was achieved by up quenching treatment. this is due to partitioning of prior austenite grains by tempered martensite plates.
منابع مشابه
Optimization of thermomechanical parameters to produce an ultra-high strength compressor disk
Structural steels with very high strength levels are often referred to as ultrahigh-strength steels (UHSS). The usage of UHSS has been extensively studied in aerospace industries and offshore platforms. In this study, medium carbon low alloy steel (AMS6305) was thermomechanicaly treated to obtain an ultra-high strength bainitic steel for aircraft engine compressor disk. A novel themomechanical ...
متن کاملAn Ultra High-Speed Compressor for Packet Networks
As it has been already proved, link layer compression is very effective when used in packet networks. However one of the major problems in such compression schemes, is that there should exist hardware modules capable of compressing the network streams up to the speed of the state-of-theart links. In this paper we present such a hardware compressor/decompressor that can work up to these speeds, ...
متن کاملPreparation of Ultra High Molecular Weight Polyethylene Using Ziegler-Natta Catalyst System: Optimization of Parameters by Response Surface Methodology
متن کامل
Optimization of Natural Rhenium Irradiation Time to Produce Compositional Radiopharmaceutical
Introduction: Previously, 186Re and 188Re radioisotopes have been produced through appropriate activities, and each of them has been used for therapeutic applications. The 186Re and 188Re have unique properties, which make them proper for the treatment of tumors in different sizes. The long-range 188Re, is suitabl...
متن کاملOptimization of TIG repair welding process parameters to obtain maximum tensile strength in AZ91C magnesium alloy
In this study, in order to modify the weld structure obtained from repair welding of AZ91C magnesium alloy and improvement of tensile strength, input parameters such as current intensity and preheating temperature were optimized for this alloy. T6 heat treatment was separately done befor and after the welding to homogenize the microstructure and improvement of the mentioned properties. Using va...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
iranian journal of materials formingناشر: shiraz university
ISSN
دوره 2
شماره 2 2015
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023