efficiency of lead removal from drinking water using cationic resin purolite
نویسندگان
چکیده
background: today, issues such as water shortage, difficulties and costs related to supplying safe water, and anomalous concentrations of heavy metals in groundwater and surface water resources, doubled the necessity of access to technical methods on removing these pollutants from water resources. methods: in this lab study, cationic resin purolite s-930 (with co-polymer styrene di-vinyl benzene structure) was used for lead removal from drinking water containing up to 22 &mug;/l. using statistical analysis and designing a full factorial experiment are the most important effective parameters on lead removal obtained through ion exchange process. results: analysis of response and interaction parameters of ion exchange showed that the resin column height has maximum and ph value has minimum effect on the efficiency of lead removal from aquatic environment. trinary interaction of “effective size, flow rate, resin column high” has the most important for lead removal efficiency in this system. so the maximum efficiency was obtained at the mesh = 40, bed height =1.6 meter, and ph= 6.5. at the best operation conditions, ability to remove 95.42% of lead concentration can be achieved. conclusion: using the resin purolite s-930 during 21-day service with 91.12% of mean lead removal ratio from drinking water is an economic and technical feasibility.
منابع مشابه
Efficiency of lead removal from drinking water using cationic resin Purolite
Background: Today, issues such as water shortage, difficulties and costs related to supplying safe water, and anomalous concentrations of heavy metals in groundwater and surface water resources, doubled the necessity of access to technical methods on removing these pollutants from water resources. Methods: In this lab study, cationic resin Purolite S-930 (with co-polymer styrene di-vinyl benzen...
متن کاملRemoval of cationic surfactants from water using clinoptilolite zeolite
Batch and column experiments were conducted to evaluate the efficiency of a clinoptilolite zeolite as an inexpensive sorbent material to remove cationic surfactant from water. With an initial surfactant concentration greater than its critical micelle concentration, the removal of surfactant is achieved by admicellar sorption onto the zeolite surface. Although the sorption capacity of hexadecylt...
متن کاملRemoval of Cationic Dyes from Aqueous Solution using Organomodified Nanoclay
In this work, organomodified nanoclay has been used as the adsorbent for the removal ofbasic blue 41, cationic dye from an aqueous solution. The performance of the organomodified nanoclay was tested in a batch system under varying pH (2–12), adsorbent dosage (0.1–2 g L-1), initial dye concentration (10–60 mgL-1), and contact time (5- 100 min). The best conditions were achieved at pH of 7,...
متن کاملReview of fluoride removal from drinking water.
Fluoride in drinking water has a profound effect on teeth and bones. Up to a small level (1-1.5mg/L) this strengthens the enamel. Concentrations in the range of 1.5-4 mg/L result in dental fluorosis whereas with prolonged exposure at still higher fluoride concentrations (4-10mg/L) dental fluorosis progresses to skeletal fluorosis. High fluoride concentrations in groundwater, up to more than 30 ...
متن کاملArsenic Removal From Drinking Water By Electrocoagulation
............................................................................................................................. ii Acknowledgments ............................................................................................................ iv List of Tables ................................................................................................................... vii List ...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
environmental health engineering and managementجلد ۲، شماره ۱، صفحات ۴۱-۴۵
کلمات کلیدی
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023