synthesis and application of the drilling mud additive in the presence of surfactants

drilling fluid is the most important lifeline of the drilling operation, that main task is facilitate the cuttings removal of the drilling. there are varieties of drilling fluids such as sodium bentonite based-drilling fluid is called “mud” and drilling foam or surfactant based-drilling fluid is called “soap”. the present work aims are study on the modified drilling mud properties by using the tio2/ polyacrylamide (pam) as a nanocomposite additive. this additive was obtained through the aqueous solution polymerization of acrylamide monomer in the presence of tio2 nanoparticles and high hydrophilic-lipophilic balance (hlb) surfactants such as sodium dodecyl sulfate (sds) and polyoxyethylene sorbitan mono-oleate (tween 80). at first, the tio2/pam nanocomposite was characterized by xrd, uv-vis, ftir, dls and sem. then the viscosity, density -specific gravity- and filtration properties of the modified drilling mud were investigated in different amount of nanocomposite compounds. the results indicated that the density, fluid loss and filter cake thickness of the modified drilling mud were decreased with the increase of the surfactant concentration, whereas the viscosity was increased. with the increasing amount of sds from 0.1 to 1.2 g in the synthesis process, the viscosity was increased approximately 4 cp and the density was decreased about 0.1 specific gravity. the nanoparticle and hlb value were affected in the filtration properties, but in general, that improved the fluid loss and filter cake thickness about 28 and 38% compared the based drilling mud, respectively.