vibration analysis of coupled double-nanocomposite microplate-systems
نویسندگان
چکیده
the aim of the paper is to analyze electro-thermo nonlinear vibration of a double-piezoelectric composite microplate-system (dpcmps) based on nonlocal piezoelasticity theory. the two microplates are assumed to be connected by an enclosing elastic medium which is simulated by pasternak foundation. both of smart composite microplates are made of poly-vinylidene fluoride (pvdf) reinforced by zigzag double walled boron nitride nanotubes (dwbnnts). the micro-electromechanical model is employed. using nonlinear strain-displacement relations and considering charge equation for coupling between electrical and mechanical fields, the motion equations are derived based on energy method and hamilton's principle. the frequency ratio of dpcmps is investigated for three typical vibrational states, namely, out-of-phase, in-phase and the case when one microplate is fixed in the dpcmps. a detailed parametric study is conducted to scrutinize the influences of the small scale coefficient, stiffness of the internal elastic medium, the volume fraction and orientation angle of the dwbnnts reinforcement, temperature change and aspect ratio. the results indicate that with increasing geometrical aspect ratio, the effect of coupling elastic medium between two smart nanocomposite microplates reduces.
منابع مشابه
Vibration analysis of coupled double-nanocomposite microplate-systems
The aim of the paper is to analyze electro-thermo nonlinear vibration of a double-piezoelectric composite microplate-system (DPCMPS) based on nonlocal piezoelasticity theory. The two microplates are assumed to be connected by an enclosing elastic medium which is simulated by Pasternak foundation. Both of smart composite microplates are made of poly-vinylidene fluoride (PVDF) reinforced by zigza...
متن کاملVibration Analysis of Global Near-regular Mechanical Systems
Some near-regular mechanical systems involve global deviations from their corresponding regular system. Despite extensive research on vibration analysis (eigensolution) of regular and local near-regular mechanical systems, the literature on vibration analysis of global near-regular mechanical systems is scant. In this paper, a method for vibration analysis of such systems was developed using Kr...
متن کاملFlow-Induced Instability Smart Control of Elastically Coupled Double-Nanotube-Systems
Flow induced vibration and smart control of elastically coupled double-nanotube-systems (CDNTSs) are investigated based on Eringen’s nonlocal elasticity theory and Euler-Bernoulli beam model. The CDNTS is considered to be composed of Carbon Nanotube (CNT) and Boron-Nitride Nanotube (BNNT) which are attached by Pasternak media. The BNNT is subjected to an applied voltage in the axial direction w...
متن کاملAnalysis of Mechanically Milled Exchange Coupled Nanocomposite Permanent Magnets
Nanocomposite permanent magnets have recently evoked wide interest because of their interesting properties. They usually consist of a hard magnetic phase having superior coercivities and a soft magnetic phase having improved values of magnetization and when they are coupled together, we get a permanent magnet with enhanced values of both the parameters and thus can be put to a lot of applicatio...
متن کاملAnalysis of the Coupled Nonlinear Vibration of a Two-Mass System
This paper presents a fixed-end two-mass system (TMS) with end constraints that permits uncoupled solutions for different masses. The coupled nonlinear models for the present fixed-end TMS were solved using the continuous piecewise linearization method (CPLM) and detailed investigation on the effect of mass-ratio on the TMS response was conducted. The investigations showed that increased mass-r...
متن کاملCoupled Flap-Lag-Torsional Vibration Analysis of Pre-twisted Non-uniform Helicopter Blades
An approximate numerical mthod is presented for analysis and determination of modal characteristics in straight, pretwisted non-unifom helicopter blades. The analysis considers the coupled flapwise bending (out of plane), chordwise bending (in plane), and torsion vibration of both rotating and non-rotating blades. The proposed method is based on the integral expansion of Green functions (struct...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
iranian journal of mechanical engineering transactions of the ismeجلد ۱۶، شماره ۱، صفحات ۵-۲۸
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023