investigation on mechanical properties of composite made of sawdust and high density polyethylene
نویسندگان
چکیده
in this research, the effect of wood species and particle size on mechanicalproperties of wood plastic composites (wpc) made of fir (abies alba) and beech(fagus orientalis l.) sawdust and high density polyethylene (hdpe) wereinvestigated. wood plastic composite (wpc) were made with 30% hdpe in abatch process at 185˚c, at two particle sizes of 40 mesh and 80 mesh. maleicanhydride polypropylene (mapp) was used as a coupling agent. the moe(modulus of elasticity) and mor (modulus of rupture), maximum tensile strengthincreased with increasing particle size.
منابع مشابه
Investigation on mechanical properties of composite made of sawdust and high density polyethylene
In this research, the effect of wood species and particle size on mechanicalproperties of wood plastic composites (WPC) made of fir (Abies alba) and beech(Fagus orientalis L.) sawdust and high density polyethylene (HDPE) wereinvestigated. Wood plastic composite (WPC) were made with 30% HDPE in abatch process at 185˚C, at two particle sizes of 40 mesh and 80 mesh. Maleicanhydride polypropylene (...
متن کاملPreliminary study of the physical and mechanical properties of soya stalk flour/high density polyethylene composite
The use of agriculture residues as filler in composites is increasing due to their strength, abundance and low cost. Soya stalks show promising renewable natural fiber. In polyethylene composites the physical and mechanical properties (flexural resistance, tensile, impacted absorbed energy, water uptake and thickness swelling) was examined at different composites. The results showed that, the m...
متن کاملdetermination of some physical and mechanical properties red bean
چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...
15 صفحه اولinvestigation of effective parameters on the rigidity of light composite diaphragms (psscb) by fem
در این رساله با معرفی سقف های psscb متشکل از ترکیب ورق های فولادی ذوزنقه ای و تخته های سیمانی الیافی به عنوان سقف های پیش ساخته (سازگار با سیستم سازه ای قاب های فولادی سبک) به بررسی پارامترهای موثر بر صلبیت سقف، پرداخته می شود. در تحقیق حاضر ابتدا به مدل سازی دو نمونه سقف آزمایش شده، به روش اجزاء محدود با استفاده از نرم افزار تحلیلی abaqus ver 6.10 پرداخته شده است. نمونه های ساخته شده تحت اعما...
preliminary study of the physical and mechanical properties of soya stalk flour/high density polyethylene composite
the use of agriculture residues as filler in composites is increasing due to their strength, abundance and low cost. soya stalks show promising renewable natural fiber. in polyethylene composites the physical and mechanical properties (flexural resistance, tensile, impacted absorbed energy, water uptake and thickness swelling) was examined at different composites. the results showed that, the m...
متن کاملDynamic Mechanical Analysis of Compatibilizer Effect on the Mechanical Properties of Wood Flour-High-Density Polyethylene Composites
In this study, effect of MAPE (maleic anhydride polyethylene) as the compatibilizer on the mechanical properties of wood-flour polyethylene composites has been investigated by using Dynamic Mechanical Analysis (DMA). Composites were made at 25% and 50% by weight fiber contents and 1% and 2% compatibilizer respectively. Controls were also made at the same fiber contents without the compatibilize...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
int. j. lignocellulosic productsناشر: gorgan university of agricultural sciences and natural resources
ISSN
دوره 1
شماره 2 2014
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023