experimental study of bond strength between fresh and old concrete

نویسندگان

هادی زرین طلا

مهدی درویش

ابراهیم زرین طلا

چکیده

todays applying concrete structures is more usual than other structures which are used in buildings as in most of the world’s countries the application ratio of concrete to steel has increased from 10 to 1. sometimes these structures require strengthening vulnerable members because of deficiency in their loading system in usual and critical conditions. there are different methods for strengthening these members. one of them is developing dimension of section by fresh concrete. in this method, the cohesion extent of fresh concrete to hardened concrete has significant role in force transfer.in this experimental project, the bond stress created between hardened concrete (core) and fresh concrete (screen) in core samples was measured and the effect of changing three factors was investigated that they are the length of sample, screen thickness, and 28 days compressive strength of screen concrete on bond stress. the push-out method was applied in this experiment for cracking the samples.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Experimental Investigation of the Methods of Evaluating the Bond Strength Between Concrete Substrate and Repair Materials

This investigation was aimed at studying the effect of test methods on bond strength between concrete substrate and repair material. Four test methods with cementations or modified-cementations repair materials, and two surface roughnesses were studied. The methods used were pull-off, slant shear, splitting prism and a new direct shear named Bi-Surface shear test. While the coefficient of varia...

متن کامل

Effect of Impressed Current on Bond Strength Between Steel Rebar and Concrete

The deterioration of bond strength between reinforcing steel and concrete as a result of impressed cathodic current with respect to the exposure time was investigated. A current in the magnitude of 3ma/ft2 (based on reinforcing rebar area) was used for a period of five years. Chemical analyses for sodium (Na+), potassium (K+) and chloride (Cl-) ions in concrete cylinders were performed as a fun...

متن کامل

Effect of the Concrete Strength on the Concrete-Steel Bond in Concrete Filled Steel Tubes

In this study, the concrete-steel bond strength of concrete filled cylindrical steel tubes has been experimentally investigated. 22 short, high strength and normal concrete filled circular steel tubes were tested. Push-out test was carried out as the common method to evaluate the bond carrying capacity. Four different concrete mixes were used in preparing the specimens. The steel tubes were w...

متن کامل

Bond of Reinforcement in High-Strength Concrete

This paper describes an examination of the development of tension lap splices in high-strength concrete and the applicability of the restriction in the ACI 318 code where the values of √fc′ used to calculate development length shall not exceed 100 psi. The focus is on the development of splices with Grade 60 epoxy-coated and uncoated bars in normalweight concrete. A summary of the behavior of b...

متن کامل

A Study on the Bond Strength between High Performance Concrete and Reinforcing Bar

As a preliminary study for the erection of floating structures using high performance concrete, this paper examines the bond characteristics between concrete and the reinforcing bar. Since the floating structure is constructed in aquatic environment, corrosion of the reinforcing steel is likely to develop more prematurely than in onshore structure in case of concrete cracking. A solution to thi...

متن کامل

Experimental study of impact strength and modulus of elasticity of reinforced concrete under ambient temperature, used in concrete dams

The choice of concrete consumption and high strength in the structure of concrete dams is of particular importance. In this laboratory research, slag alkaline concrete containing 0, 4 and 8% nanosilica and 1 and 2% polyolefin fibers has been produced in 5 mixing designs. A design of control concrete containing Portland cement was prepared to compare with the test results of reinforced concre...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
مهندسی سازه

جلد ۱۲، شماره ۲، صفحات ۱۱-۲۰

کلمات کلیدی

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023