steel coated with cationic poly (ethylenimine) (pei) and anionic poly (vinylsulfate) (pvs) polyelectrolyte multilayer nanofilm with different benzotriazole inhibitor concentrations
نویسندگان
چکیده
nano-films consisting of an alternating sequence of positively and negatively charged polyelectrolyteshave been prepared by means of the electrostatic layer-by-layer sequential assembly technique on mildsteels. the mild steels were pretreated electrochemically to modify the mild steel surface. the modificationof the mild steel surface resulted in increasing the adhesion of the obtained nano-films and prevented thecorrosion attack during the coating processes. different concentrations of benzotriazole inhibitor wereencapsulated between cationic and anionic polyelectrolytes nano films. the encapsulation of benzotriazole inthe deposited nano-films was verified by u.v visible spectroscopy. the work mainly focuses on the effect ofthese nano-films of polyelectrolytes with inhibitor and without inhibitors on the corrosion protection. tafel,corrosion potential, potentiostatic and econ vs. time experiments were carried out in 0.7m nacl solution.weight loss method was used for measuring the corrosion rate of coated and uncoated mild steel substrate. asignificant improvement in the corrosion protection was achieved especially in the case of electrochemicallymodifying the mild steel surface and encapsulating the inhibitors between the polyelectrolytes nano-films.
منابع مشابه
Steel Coated with Cationic Poly (Ethylenimine) (PEI) and Anionic Poly (Vinylsulfate) (PVS) Polyelectrolyte Multilayer Nanofilm with Different Benzotriazole Inhibitor Concentrations
Nano-films consisting of an alternating sequence of positively and negatively charged polyelectrolyteshave been prepared by means of the electrostatic layer-by-layer sequential assembly technique on mildsteels. The mild steels were pretreated electrochemically to modify the mild steel surface. The modificationof the mild steel surface resulted in increasing the adhesion of the obtained nano-fil...
متن کاملDependency of polyelectrolyte complex stoichiometry on the order of addition 2. Aluminum chloride and poly-vinylsulfate
In the first part of this series it was shown that the stoichiometry of complexation between oppositely charged polyelectrolytes became i t a t r n a ©
متن کاملPolyelectrolyte-Modified Microemulsions: Formation of Nanoparticles in the Presence of Anionic and Cationic Polyelectrolyte
The paper is focused on the formation of calcium phosphate nanoparticles (CP) in polyelectrolyte-modified microemulsions, in a microemulsion template phase consisting of cyclohexane, water, anionic surfactantant and cosurfactant, in the presence of anionic and cationic polyelectrolyte. It is shown that polyelectrolyte, can be incorporated into the individual inverse microemulsion droplets. The ...
متن کاملPolyelectrolyte-Modified Microemulsions: Formation of Nanoparticles in the Presence of Anionic and Cationic Polyelectrolyte
The paper is focused on the formation of calcium phosphate nanoparticles (CP) in polyelectrolyte-modified microemulsions, in a microemulsion template phase consisting of cyclohexane, water, anionic surfactantant and cosurfactant, in the presence of anionic and cationic polyelectrolyte. It is shown that polyelectrolyte, can be incorporated into the individual inverse microemulsion droplets. The ...
متن کاملMultilayer Nano Films for Corrosion Control
Nano films consisting of an alternating sequence of positively and negatively charged polyelectrolytes have been prepared by means of the electrostatic layer-by-layer (LBL) sequential assembly technique on treated and untreated mild steel wires. Inhibitor was encapsulated between cationic and anionic polyelectrolyte nano films. This paper mainly focuses on the effect of these nano-films of poly...
متن کاملSelf-healing multilayer polyelectrolyte composite film with chitosan and poly(acrylic acid).
If self-healing materials can be prepared via simple technology and methods using nontoxic materials, this would be a great step forward in the creation of environmentally friendly self-healing materials. In this paper, the specific structural parameters of the various hydrogen bonds between chitosan (CS) and polyacrylic acid (PAA) were calculated. Then, multilayer polyelectrolyte films were fa...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
physical chemistry and electrochemistryجلد ۱، شماره ۱، صفحات ۵۱-۶۳
کلمات کلیدی
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023