optimization of cellulose extraction from sugar beet pulp
نویسندگان
چکیده
cellulose is a raw material which is extensively used in the manufacture of paints, papers, textiles, agricultural products and cosmetics. the waste of sugar beet pulp after titration is a source of cellulose. the current study was carried out to study the possibility of cellulose production from sugar beet pulp waste at titration stage as a 3×3×2 factorial study on the basis of a randomized complete block design with three replications. so, firstly the waste of titrated sugar beet pulp was collected, washed, dried and ground. then, the ground sample was hydrolyzed by hydrochloride acid 0.6 n at 45°c for 48 hours and was mixed with water at 70°c for one hour in order to isolate dissolved pectin and pectic compounds. then, the remaining waste was washed, dried and treated with soda solution with the ratio of 1 g waste:100 ml soda solution at three levels with the concentrations of 2.5, 5 and 7.5% (w/v) at three lengths of soda impact including 8, 10 and 12 hours and two levels of temperature of soda impact including 24 and 45°c in order to isolate the basic medium-dissolved polysaccharides from cellulose. the measured traits included relative purity, viscosity and cellulose molecular mass. results showed that the effect of soda concentration and stirring length as well as their interaction was significant on relative purity at 5% probability level. in addition, it was revealed that out of the studied treatments, the cellulose extracted through treating with 5% soda stirred for 12 hours at 45°c had significantly higher quality given that it enjoyed 95.2% relative purity, 15.9 mpa.s-1 viscosity and 255000 kg.mol-1 molecular mass which were significantly higher than those of other treatments. therefore, this method allows extracting cellulose with 95.2% relative purity from sugar beet waste.
منابع مشابه
Fungal secretomes enhance sugar beet pulp hydrolysis
The recalcitrance of lignocellulose makes enzymatic hydrolysis of plant biomass for the production of second generation biofuels a major challenge. This work investigates an efficient and economic approach for the enzymatic hydrolysis of sugar beet pulp (SBP), which is a difficult to degrade, hemicellulose-rich by-product of the table sugar industry. Three fungal strains were grown on different...
متن کاملExtraction of pectic polysaccharides from sugar-beet cell walls
Previous methods of extracting pectin from sugar-beet have used pulp as the starting material. As the temperature and pressure of the pulping process may modify the architecture of the cell wall, we have adapted a relatively non-disruptive method to characterise cell wall material (CWM) isolated directly from the sugar-beet. Cell walls from mature sugar-beets (Beta vulgaris L Aztec) were sequen...
متن کاملCellulase Production by Trichoderma reesei using Sugar Beet Pulp
Cellulase production by the fungus Trichoderma reesei was studied using sugar beet pulp (SBP) as a substrate. The subculture medium was a salt solution consisting of KH2PO4, CaCl2, etc. Fungal cells were sub-cultured in an orbital shaker (180 rpm) at 30°C for 1-2 generations (two days for each generation) and were then used as an inoculum. Exponential cells were inoculated into a medium contain...
متن کاملIntegrated hydrolyzation and fermentation of sugar beet pulp to bioethanol.
Sugar beet pulp is an abundant industrial waste material that holds a great potential for bioethanol production owing to its high content of cellulose, hemicelluloses, and pectin. Its structural and chemical robustness limits the yield of fermentable sugars obtained by hydrolyzation and represents the main bottleneck for bioethanol production. Physical (ultrasound and thermal) pretreatment meth...
متن کاملpectin extraction from commercial cultivars of sugar beet pulp using the pre-hydrolysis technique
pectin is used as gelatinizing agent in food industry. in this study pectin was extracted from five commercial sugar beet varieties namely: doroty, rasul, 7112, br1 and ic using pre-hydrolysis technique. experiments were conducted using factorial design to verify the effect of temperature, time, percentage of hcl and water requirements on the extraction rate of pectin. the qualitative factors o...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
چغندرقندجلد ۲۷، شماره ۲، صفحات ۲۱۰-۱۹۷
کلمات کلیدی
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023