removal of heavy metal by nickel oxide nano powder
نویسندگان
چکیده
in this study metal oxide nano powder namely nio nanopowder was prepared .the producedmetal oxide was characterized and used as potential adsorbent for the removal of pb and zn from aqueoussolution. the rate of uptake of the pb and zn are rapid in the beginning and the time required for equilibrium adsorption is 120 min .the time of equilibrium as well as time required to achieve a definite fraction of equilibrium adsorption is independent of initial concentration. the results showed that the removal of pb increased significantly as the ph increased from 2.0 to 6.0 and approach a plateau at ph range of 6.0–9.0., while the removal of zn increased significantly as the ph increased from 2.0 to 9.0. the adsorption of pb onto nio follows the langmiur isotherm, while the adsorption of zn onto nio follows the freundlish isotherm . the pseudo second order kinetic model provided good correlation for the adsorption of pb onto nio nanopowder while the pseudo first order kinetic model provided good correlation for the adsorption of zn onto nio nanopowder.
منابع مشابه
Metal Ions Removal Using Nano Oxide Pyrolox™ Material
The paper presents the use of Pyrolox™ containing manganese nano oxides used for the removal of Cu(II), Zn(II), Cd(II), and Pb(II) as well as U(VI) ions. Their concentrations were analyzed using the atomic absorption spectrometer SpectrAA 240 FS (Varian) as well as UV-vis method. For this purpose the static kinetic and equilibrium studies were carried out using the batch technique. The effect o...
متن کاملSonochemical Synthesis of Nickel Oxide Nano-particle
Nickel oxide (NiO) nanopowder was obtained during a sonochemical method. Nickel hydroxide precursor, prepared by addition of sodium hydroxide (NaOH) to nickel nitrate Ni(NO3)2 solution and vigorously stirring until the pH becomes 7.2. Ultrasounds waves were applied during precipitation period and after drying in oven nanopowder NiO was achieved. Transient and scanning electron microscopy showed...
متن کاملHeavy Metal Removal Using Dithiocarbamates
ajor emphasis is placed today on treating plating solutions and rinsewater to reduce the concentration of toxic metals to below established limits prior to discharge or water reuse. Available technology is adequate for partial treatment of most wastewater; however, new technology is needed to scavenge heavy metals from complexed or chelated compounds in rinsewater. Several report^^-'^ from this...
متن کاملRemoval of Cd2+ from Aqueous Solution by Nickel Oxide/CNT Nanocomposites
The present work investigates the efficiency of the nickel oxide/carbon nanotube (NiO/CNT) nanocomposite for the removal of Cd2+ metal ions from an aqueous. The NiO/CNT nanocomposite was synthesized by the direct co-precipitation method in an aqueous media in the presence of CNTs. The resulting materials were characterized by FT-IR, XRD, SEM, N2 adsorption-desorption</em...
متن کاملRemoval of heavy metal (copper) using Microalgae (Spirulinaplatensis) by Taguchi Method
Environmental pollution by heavy metals is one of the main problems in the environment. Biosorption, is inactivated or live and dead biomass is used for the removal of heavy metals. In this study, a micro alga (Cyanobacteria) Spirulina platensis was used as adsorbents for the remediation of copperfrom aqueous solution.The purpose of this research is to study the possibility or impossibility of...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
international journal of environmental researchناشر: university of tehran
ISSN 1735-6865
دوره 8
شماره 3 2014
کلمات کلیدی
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023