effect of magnetic field on unsteady natural convection heat transfer of cu– water nanofluid in a square porous cavity
نویسندگان
چکیده
magnetic field effect on unsteady natural convection heat transfer of cu–water nanofluid in a square porous cavity was studied numerically in here. at first, initial temprature of the cavity was and vertical walls were at temprature . suddenly the right wall's tamprature was changed to and the horizontal walls were adiabatic. the effective parameters in this study were ra , ha, and . which appear in the non-dimensionalized equations. ra is a function of temperature difference between hot and cold walls, ha is a parameter that depends on the magnetic field, and is the volume fraction of nano particles. the non-dimensionalized governing equations were obtained based on darcy model. a control volume approach was used for solving these equations. the effect of the variation of parameters, ra , ha and , on heat transfer rate, fluid flow, isotherms, and the steady time of solution were investigated. the solutions show that steady time decreases, as ra increases or decrease. while, variation of ha for high ra has different effects on steady time.
منابع مشابه
Effect of nanoparticle shape on natural convection heat transfer in a square cavity with partitions using water-SiO2 nanofluid
In this paper a numerical investigation is performed to study the effects of different nanofluids on convective heat transfer enhancement in a partitioned square cavity subject to different shapes of nanoparticle using water-SiO2 nanofluid. This study has been carried out to analyze the effects of SiO2 nanoparticle, its volumetric fraction between 2 and 4%, and nanoparticle shape (i.e. blades, ...
متن کاملCFD analysis of natural convection heat transfer in a square cavity with partitions utilizing Al2O3 nanofluid
In the present study, natural convective heat transfer in a partitioned square cavity utilizing nanofluids is studied. The vertical left and right walls are considered as the hot and cold walls, respectively and the partitions assumed to be adiabatic. The nanofluid used in this study is Al2O3 with the volume fraction of 20%. It is assumed that nanofluid is a single phase f...
متن کاملCFD analysis of natural convection heat transfer in a square cavity with partitions utilizing Al2O3 nanofluid
In the present study, natural convective heat transfer in a partitioned square cavity utilizing nanofluids is studied. The vertical left and right walls are considered as the hot and cold walls, respectively and the partitions assumed to be adiabatic. The nanofluid used in this study is Al2O3 with the volume fraction of 20%. It is assumed that nanofluid is a single phase f...
متن کاملcfd analysis of natural convection heat transfer in a square cavity with partitions utilizing al2o3 nanofluid
in the present study, natural convective heat transfer in a partitioned square cavity utilizing nanofluids is studied. the vertical left and right walls are considered as the hot and cold walls, respectively and the partitions assumed to be adiabatic. the nanofluid used in this study is al2o3 with the volume fraction of 20%. it is assumed that nanofluid is a single phase fluid. fluent 6.3.26 is...
متن کاملCFD simulations on natural convection heat transfer of alumina-water nanofluid with Brownian motion effect in a 3-D enclosure
The CFD simulation has been undertaken concerning natural convection heat transfer of a nanofluid in vertical square enclosure, whose dimension, width height length (mm), is 40 40 90, respectively. The nanofluid used in the present study is -water with various volumetric fractions of the alumina nanoparticles ranging from 0-3%. The Rayleigh number is . Fluent v6.3 is used to simulate nanofluid ...
متن کاملBuoyancy driven heat transfer of a nanofluid in a differentially heated square cavity under effect of an adiabatic square baffle
Buoyancy driven heat transfer of Cu-water nanofluid in a differentially heated square cavity with an inner adiabatic square baffle at different positions is studied numerically. The left and right walls of the cavity are at temperatures of Th and Tc, respectively that Th > Tc, while the horizontal walls are insulated. The governing equations are discretized using the finite volume method while ...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
مکانیک سیالات و آیرودینامیکجلد ۴، شماره ۱، صفحات ۰-۰
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023