the impact of hole making strategies on tool wear in aisi d2 tool steel

نویسندگان

هادی ایمانی

محمدحسین صادقی

حجت اله رنجبر

امیر راستی

چکیده

0

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Applications of Impedance Plane and Magnetic Differential Permeability in Microstructural Characterization of AISI D2 Tool Steel

Two nondestructive electromagnetic/magnetic techniques including hysteresis loop and eddy current methodologies have been used to characterize microstructural changes of AISI D2 cold work tool steel as a result of quench and tempering treatments. To measure the fraction retained austenite in quenched microstructure, six specimens were austenitized in the range  of 1000-1130 °C. Samples austenit...

متن کامل

Optimization of Cutting Parameters on Tool Wear and Workpiece Surface Temperature in Turning of Aisi D2 Steel

A R T I C L E I N F O AISI D2 steel, Tool wear, Workpiece surface temperature, Taguchi method, Regression analysis. Received 19 July 2012 Accepted 29 August 2012 Available online 31 December 2012 Now-a-days increasing the productivity and the quality of the machined parts are the main challenges of metal cutting industry during turning processes. Optimization methods in turning processes, consi...

متن کامل

Fatigue Life of Graphite Powder Mixing Electrical Discharge Machining AISI D2 Tool Steel

The present paper deals with the design of experimental work matrices for two groups of experiments by using Response surface methodology (RSM). The first EDM group was dealt with the use of kerosene dielectric alone, while the second was treated by adding the graphite micro powders mixing to dielectric fluid (PMEDM). The total heat flux generated and fatigue lives after EDM and PMEDM models we...

متن کامل

Hot Forming of Aisi A2 Tool Steel

In order to optimize the hot forming process of tool steels, further improvement of flow stress prediction and additional knowledge on hot deformability, especially at lower and upper limits of the hot working range, are required. The hot working ranges for these steels are very narrow as a consequence of the role of alloying elements, which form carbides. Carbides improve tool steel’s hardenab...

متن کامل

Check Tic-coated Tungsten Carbide Tool Wear in Machining Steel

In industrial production systems, including the most important factors in the economic field machining operations, reduce tool wear due to abrasive nature of the phenomenon on many factors, including temperature Lathe tool, influences, machining conditions (cutting speed, speed losses, forcing to rebuild parts of the manufacturing tolerances disassemble tool wear is caused by the phenomenon, as...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
مهندسی مکانیک مدرس

جلد ۱۵، شماره ویژه نامه -۱۳، صفحات ۲۰۷-۲۱۱

کلمات کلیدی

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023