geometrical model for rectangular-inserted face milling of surfaces with parabolic cross-sections in parallel direction with machining feed
نویسندگان
چکیده
0
منابع مشابه
Discrete Cutting Force Model for 5-Axis Milling with Arbitrary Engagement and Feed Direction
5-axis machining operations bring new challenges for predicting cutting forces. Complex tool workpiece engagements and tool orientations make it difficult to adapt 3-axis process models for 5-axis operations. A new model is developed to predict cutting forces with arbitrary tool/workpiece engagement and tool feed direction. A discretization approach is used, in which the tool is composed of mul...
متن کاملOptimization of Machining Parameters for Face Milling Operation using ANOVA
To remain successful in today’s competitive market, the manufacturers should rely on their Engineers and production professionals for quick and effective manufacturing setup and also to achieve Quality products. The machining process on a CNC Milling is programmed by speed, feed rate, and cutting depth, which are frequently determined based on the job shop experiences However, the machine perfo...
متن کامل- 14 - Formation of MoO 2 Nanotube with Rectangular Cross Sections ∗
MoO2 nanotube with rectangular cross sections can be prepared on Mo substrates by using an O2-C2H2 combustion-flame method [Jpn. J. Appl. Phys. 44 (2005) L449]. We have investigated the growth behavior of the nanotube in detail by using scanning electron microscopy and energy dispersive x-ray microanalysis. The precursor of the growth is produced onsite at the Mo substrate, through reactions wi...
متن کاملSurfaces with Central Convex Cross-sections
Say that a surface in S ⊂ R has the central plane oval property, or cpo, if • S meets some affine plane transversally along an oval, and • Every such transverse plane oval on S has central symmetry. We show that a complete, connected C surface with cpo must either be a cylinder over a central oval, or else quadric. We apply this to deduce that a complete C surface containing a transverse plane ...
متن کاملSingle-crystalline vanadium dioxide nanowires with rectangular cross sections.
We report the synthesis of single-crystalline VO2 nanowires with rectangular cross sections using a vapor transport method. These nanowires have typical diameters of 60 (+/-30) nm and lengths up to >10 mum. Electron microscopy and diffraction measurements show that the VO2 nanowires are single crystalline and exhibit a monoclinic structure. Moreover, they preferentially grow along the [100] dir...
متن کاملInvestigation the Milling Strategies Effects on Machining of Convex Surfaces made of Glass/Epoxy Composite
In this study the effects of machining parameters such as shearing speed, feed rate, tool diameter and machining depth on different milling strategies i.e. 3D offset, spiral, raster and radial to produce the convex surface made of epoxy/glass composites is investigated. The effects of mentioned strategies on output parameters such as surface roughness and milling removal rate is also studied. T...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
مهندسی مکانیک مدرسجلد ۱۵، شماره ویژه نامه -۱۳، صفحات ۱۷۶-۱۸۱
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023