investigating the machining parameters in turning of monel k500 super alloy at dry and minimum quantity lubrication (mql) by nano-fluids conditions
نویسندگان
چکیده
0
منابع مشابه
Minimum Quantity Lubrication (MQL) in Machining: Benefits and Drawbacks
Micro lubrication or also known as minimum quantity lubrication (MQL) serves as an alternative to flood cooling by reducing the volume of cutting fluid used in the machining process; but not without significant health concerns. Flood cooling is primarily used to cool and lubricate the cutting tool and work piece interface during machining process. The adverse health effects caused by the use of...
متن کاملAnalysis of Minimum Quantity Lubrication (MQL) for Different Coating Tools during Turning of TC11 Titanium Alloy
The tool coating and cooling strategy are two key factors when machining difficult-to-cut materials such as titanium alloy. In this paper, diamond coating was deposited on a commercial carbide insert as an attempt to increase the machinability of TC11 alloy during the turning process. An uncoated carbide insert and a commercial Al₂O₃/TiAlN-coated tool were also tested as a comparison. Furthermo...
متن کاملCharacterization of Cutting Parameters in the Minimum Quantity Lubricant (MQL) Machining Process of a Gearbox
This paper aims to find the key process parameters for machining different parts of an automobile gearbox, commissioned by a company that needs to replace with the MQL lubrication system their current machining process based on cutting fluids. It particularly focuses on the definition of appropriate cutting parameters for machining under the MQL condition through a statistical method of Design ...
متن کاملPhD DEFENSE ANNOUNCEMENT Tittle: FUNDAMENTAL TOOL WEAR STUDY IN TURNING OF Ti-6Al-4V ALLOY (Ti64) AND NANO-ENHANCED MINIMUM QUANTITY LUBRICATION (MQL) MILLING
Tittle: FUNDAMENTAL TOOL WEAR STUDY IN TURNING OF Ti-6Al-4V ALLOY (Ti64) AND NANO-ENHANCED MINIMUM QUANTITY LUBRICATION (MQL) MILLING Scheduled Date of PhD Defense: 1/9/2015 Scheduled Time of PhD Defense: 3.00PM Scheduled Location of PhD Defense (Building & Room #): 3540 Engineering Building Full name: Trung Kien Nguyen PID: A45082194 Email: [email protected] PhD Degree Major: Mechanical Enginee...
متن کاملCutting Parameters in the Minimum Quantity Lubricant (mql) Machining Process of a Gearbox
Today one of the top priorities in the machining industry is to increase or retain the profit margin through cost reduction. In addition, consumers are becoming increasingly aware of the impact that the life cycle of products has on the environment, at the time of their choice. So companies are required to research and develop sustainable processes or adapt existing ones. This research has been...
متن کاملAnalysis of effect of Minimum Quantity Lubrication on different machining parameters Cutting Force, Surface Roughness and Tool Wear by Hard Turning of AISI-4340 Alloy Steel a Review
This paper deals with the study of various machining process and show the effect of different cutting parameters on the properties of material. There are several important factors in the product quality which are surface finish, cutting temperature, tool life and coolant quality. The use of coolant generally causes life of tools and it also maintains work piece surface properties without damage...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
مهندسی مکانیک مدرسجلد ۱۵، شماره ویژه نامه -۱۳، صفحات ۵۹-۶۳
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023