computational simulation of free cooling in a building using phase change material
نویسندگان
چکیده
0
منابع مشابه
Off - Peak Cooling Using Phase Change Material
The electric utilities in the United States are faced with continued rapid growth in electrical demand. The traditional response to growth in demand has been the expansion of generating capacity. However , economic, environmental, and scheduling constraints will combine to make adequate expansion difficult, if not impossible, in the 1980's. This thesis examines load management as an alternative...
متن کاملApplication of Phase Change Material (PCM) for Cooling Load Reduction in Lightweight and Heavyweight Buildings: Case Study of a High Cooling Load Region of Iran
The application of phase change material (PCM) for energy conservation purposes in the residential buildings was investigated in the present study. Two types of building in terms of materials as the lightweight building (LWB) and heavyweight building (HWB) located in a high cooling load demanding region of Iran were considered for the study. Different types of PCM from organic and inorganic cat...
متن کاملSimulation of phase change drywalls in a passive solar building
Integration of phase change materials (PCMs) into building fabrics is considered to be one of the potential and effective ways of minimizing energy consumption and CO2 emissions in the building sector. In order to assess the thermal effectiveness of this concept, composite PCM drywall samples (i.e. randomly-mixed and laminated PCM drywalls) have been evaluated in a model passive solar building....
متن کاملTransient cooling of electronics using phase change material (PCM)-based heat sinks
Use of a phase change material (PCM)-based heat sink in transient thermal management of plastic quad flat package (QFP) electronic devices was investigated experimentally and numerically. Results show that increased power inputs enhance the melting rate as well as the thermal performance of the PCM-based heat sinks until the PCM is fully melted. A three-dimensional computational fluid dynamics ...
متن کاملEffect of Using Nano Encapsulated Phase Change Material on Thermal Performance of Micro Heat Sink
The aim of this paper is to enhance thermal performance of a microchannel heat sink by using nanoencapsulated phase change material (NEPCM) slurry as a cooling fluid instead of pure fluid. A threedimensional model of a circular channel using water slurry of NEPCM was developed. The results show a significant reduction in the mean fluid temperature along the channel and heat sink wall temperatu...
متن کاملInvestigation of Radiative Cooling Using a Photonic Composite Material for Water Harvesting
The objective of this study is to design and analyse materials which are capable of harvesting water from thin air using condensation phenomenon which employs the radiative cooling approach. These passive cooling materials not only solve the water generating problems, but also employed in various cooling applications. The fundamental concept of radiative cooling is analysed and the performance ...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
مهندسی مکانیک مدرسجلد ۱۶، شماره شماره ۱۳ مقالات کنفرانس، صفحات ۱۳۵-۱۴۰
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023