a comparison between some physical properties of haj¬¬-ghanbari and shahani varieties of date (fruit)

نویسندگان

مهدی کرامت جهرمی

شاهین رفیعی

علی جعفری

سیدسعید محتسبی

رضا میراشه

چکیده

as a first step towards mechanization related to any product, including date fruit, it is necessary to have comprehensive information about the product. physical and mechanical properties are needed for the design of post harvest machinery and equipment. the objective of this study was to determine and compare some physical properties such as dimension, mass and volume, particulate density, pitted density, bulk density, porosity, projected areas, geometric mean diameter, sphericity and surface area of haj-ghanbari and shahani varieties of date fruit. also coefficient of static friction on three different surfaces including galvanized iron steel, glass and plywood were determined and compared. experiments for date while pitted dates were carried out at 12.90% and 12.20% (w.b.) moisture content for haj-¬ghanbari and 30.55% and 29.42% (w.b.) for shahani variety. results indicated that mean mass and volume were 5.57 g and 4.74 g/cm3 for haj-¬ghanbari and 8.69 g and 8.67 g/cm3 for shahani variety. size and projected areas of shahani variety were greater than those for haj-¬ghanbari. the average fruit true density, pitted density and bulk density of haj¬-ghanbari variety were greater than those for than shahani variety while porosity was less than that for shahani. the geometric mean diameter, surface area and mean coefficient of static friction of shahani date were more than those for haj¬-ghanbari while sphericity was equal for the two varieties with an average value of 0.58. results are useful in design of post harvest equipments and machinery for date fruit.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

determination of some physical and mechanical properties red bean

چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...

15 صفحه اول

some properties of fuzzy hilbert spaces and norm of operators

in this thesis, at first we investigate the bounded inverse theorem on fuzzy normed linear spaces and study the set of all compact operators on these spaces. then we introduce the notions of fuzzy boundedness and investigate a new norm operators and the relationship between continuity and boundedness. and, we show that the space of all fuzzy bounded operators is complete. finally, we define...

15 صفحه اول

a comparison of linguistic and pragmatic knowledge: a case of iranian learners of english

در این تحقیق دانش زبانشناسی و کاربردشناسی زبان آموزان ایرانی در سطح بالای متوسط مقایسه شد. 50 دانش آموز با سابقه آموزشی مشابه از شش آموزشگاه زبان مختلف در دو آزمون دانش زبانشناسی و آزمون دانش گفتار شناسی زبان انگلیسی شرکت کردند که سوالات هر دو تست توسط محقق تهیه شده بود. همچنین در این تحقیق کارایی کتابهای آموزشی زبان در فراهم آوردن درون داد کافی برای زبان آموزان ایرانی به عنوان هدف جانبی تحقیق ...

15 صفحه اول

extraction and acetylation of purified trypsin from bovin pancreas and study of some its physico-chemical properties

آنزیم تریپسین در شرایط قلیایی ناپایدار می باشد .و فعالیت پروتئولیتیکی تریپسین منجربه خود هضمی آن در جایگاههای خاصی می گردد. بنابر این آنزیمی با ناپایداری بالا محسوب میگردد. در سالهای اخیر موفق شدند که با ایجاد تغیرات شیمیایی با اضافه کردن فلزات خاص ، کلسیم و یا عمل استیلاسیون منجر به افزایش پایداری آنزیم تریپسین گردند. مطالعات در حال حاضر نشان می دهد که تریپسین استیله شده فعالیت آنزیمی خود را ...

15 صفحه اول

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
مهندسی بیوسیستم ایران

جلد ۳۹، شماره ۱، صفحات ۰-۰

کلمات کلیدی
as a first step towards mechanization related to any product including date fruit it is necessary to have comprehensive information about the product. physical and mechanical properties are needed for the design of post harvest machinery and equipment. the objective of this study was to determine and compare some physical properties such as dimension mass and volume particulate density pitted density bulk density porosity projected areas geometric mean diameter sphericity and surface area of haj ghanbari and shahani varieties of date fruit. also coefficient of static friction on three different surfaces including galvanized iron steel glass and plywood were determined and compared. experiments for date while pitted dates were carried out at 12.90% and 12.20% (w.b.) moisture content for haj ¬ghanbari and 30.55% and 29.42% (w.b.) for shahani variety. results indicated that mean mass and volume were 5.57 g and 4.74 g/cm3 for haj ¬ghanbari and 8.69 g and 8.67 g/cm3 for shahani variety. size and projected areas of shahani variety were greater than those for haj ¬ghanbari. the average fruit true density pitted density and bulk density of haj¬ ghanbari variety were greater than those for than shahani variety while porosity was less than that for shahani. the geometric mean diameter surface area and mean coefficient of static friction of shahani date were more than those for haj¬ ghanbari while sphericity was equal for the two varieties with an average value of 0.58. results are useful in design of post harvest equipments and machinery for date fruit.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023