evaluation of hydraulic sensitivity indicators for baffle modules (case study: varamin irrigation and drainage network)

نویسندگان

میناسادات سیدجواد

کارشناس ارشد مهندسی آبیاری و زهکشی، گروه مهندسی آبیاری و زهکشی، پردیس ابوریحان، دانشگاه تهران، پاکدشت، ایران محمود مشعل

دانشیار گروه مهندسی آبیاری و زهکشی، مهندسی آبیاری و زهکشی، پردیس ابوریحان، دانشگاه تهران، پاکدشت، ایران

چکیده

according to the low efficiency of irrigation and drainage networks and water distribution in iran, simulating water flow and sensitivity structures and networks is considered as a new approach to evaluate the performance hydroelectric projects in the country. in this study, because of reduced water supply and distribution, especially in downstream irrigation and drainage networks varamin to evaluate the sensitivity network in off takes structures. the sensitivity of the survey data by examining water original data and compared them with the amount of water needed to grow the network. network simulation and analysis using hydrodynamic model sobek presented for sensitivity and relationships off take structures is done. studies and sensitivity analysis for hydraulic structures varamin irrigation system showed that baffle modules sensitivity are considerable. the study of equations, the sensitivity baffle modules occurred more than the depth upstream and valve patency rate in terminal structures. for optimal operation of the irrigation system in varamin best way to provide for downstream water depth of each channel. in these conditions, the water supply and wastewater in all modules in the patency rate does not change.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Evaluation of Hydraulic Sensitivity Indicators for Baffle Modules (Case Study: Varamin Irrigation and Drainage Network)

Measuring sensitivity of hydraulic structures is considered as an approach for evaluation of water projects performance, due to lower distribution efficiency in Irrigation and Drainage project schemes. Sensitivity analysis approach for irrigation structures is one of flow analysis methods which are developed in recent years in order to measure the behavior of flow in hydraulic structures in an ...

متن کامل

Aggregated hydraulic sensitivity indicators for irrigation system behavior

Knowledge of the way perturbations propagate and/or attenuate along free-flow irrigation delivery systems is crucial for monitoring and effectively operating a system. With this knowledge sections of the canal system which are identified as sensitive to flow perturbations should be targeted for more frequent inspection and operational decisions than others. The steady-state hydraulic approach f...

متن کامل

technical and legal parameters for determination of river boundary,( case study haraz river)

چکیده با توسعه شهر نشینی و دخل و تصرف غیر مجاز در حریم رودخانه ها خسارات زیادی به رودخانه و محیط زیست اطراف آن وارده می شود. در حال حاضر بر اساس آئین نامه اصلاح شده بستر و حریم رودخانه ها، حریم کمی رودخانه که بلافاصله پس از بستر قرار می گیرد از 1 تا20 متر از منتهی الیه طرفین بستر رودخانه تعیین، که مقدار دقیق آن در هر بازه از رودخانه مشخص نیست. در کشورهای دیگر روشهای متفاوتی من جمله: درصد ریسک...

15 صفحه اول

Evaluation of Drainmod model in Irrigation and Drainage Network of ABADAN Date palms

In the study, Drainmod model was used to compare measured water table depth fluctuations on the farm with those simulated by the model, also comparison of measured drainage outflow of the farm drains and model simulated was investigated. This study was made in a part of the Irrigation and Drainage Network of ABADAN Date palms. By statistical analysis of the measured and predicted water table de...

متن کامل

Determining the best irrigation water scheduling with the aim of maximum productivity in irrigation and drainage networks (Case study: Qazvin irrigation network)

In this study, a model was developed to determine the optimal irrigation schedule for the Qazvin Plain in such a way that economic productivity is maximized with the amount of water available and the area under cultivation. The AquaCrop plant growth model was used to determine crop performance in different irrigation programs. The plant growth model was connected to the MATLAB programming envir...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
مدیریت آب و آبیاری

جلد ۴، شماره ۲، صفحات ۲۲۹-۲۴۲

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023