damping of mechanical waves with styrene/butadiene rubber filled with polystyrene particle: effects of particles size and wave frequency

نویسندگان

مجید حقگو

ناصر محمدی

مهدی احمدی

فرهاد فقیهی

معصومه پازوکی

چکیده

utilizing polymeric materials for damping mechanical waves is of great importance in various fields of applications such as military camouflage, prevention of structural vibrational energy transfer, and noise attenuation. this ability originates from segmental dynamics of chain-like polymer molecules. damping properties of styrene-butadiene rubbercontaining 10 wt% of monosize polystyrene particles with different diameters (from 80 nm to 500 μm) was investigated in the frequency range of vibration, sound, and ultrasound via dynamic mechanical thermal analysis, normalsound adsorption test, and ultrasound attenuation coefficient measurement. the obtained results indicated that for different systems, containing different sizes of polystyrene particles, the area under the damping curve does not show significant change comparing to the neat sbr in the frequency range studied. however, addition of polystyrene particles, specifically nanosized particles, resulted in emergence of a secondary glass transition temperature which could be attributed to the modified dynamics of a layer of matrix molecules near the surface of ps particles. in the range of sound frequency, 0.5 to 6.3 khz, the maximum damping was observed for the system containing polystyrene nanoparticles. however the single damping curve of neat sbr was separated into two or even three distinct curves owing to the presence of the particles. the maximum damping in the ultrasound frequency range was found for the system containing 0.5 mm polystyrene particles. this is attributed to different contributions from matrix chains dynamics and the reflection of mechanical waves from particles-matrix interface at different frequency ranges. on other words, the increase in the glass transition temperature of the elastomeric matrix phase with increasing the mechanical wave frequency causes a reduction in the contribution from matrix chains dynamics while the contribution due to diffraction from dispersed phase increases as the particles size approaches the wavelength of the mechanical waves.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

a comparison of teachers and supervisors, with respect to teacher efficacy and reflection

supervisors play an undeniable role in training teachers, before starting their professional experience by preparing them, at the initial years of their teaching by checking their work within the proper framework, and later on during their teaching by assessing their progress. but surprisingly, exploring their attributes, professional demands, and qualifications has remained a neglected theme i...

15 صفحه اول

single-step synthesis of multi-component spirobarbiturates using ionic liquids and synthesis of substituted pyridine filled with catalysts supported on solid substrate

in this thesis, a better reaction conditions for the synthesis of spirobarbiturates catalyzed by task-specific ionic liquid (2-hydroxy-n-(2-hydroxyethyl)-n,n-dimethylethanaminium formate), calcium hypochlorite ca(ocl)2 or n-bromosuccinimide (nbs) in the presence of water at room temperature by ultrasonic technique is provided. the design and synthesis of spirocycles is a challenging task becaus...

15 صفحه اول

the evaluation of language related engagment and task related engagment with the purpose of investigating the effect of metatalk and task typology

abstract while task-based instruction is considered as the most effective way to learn a language in the related literature, it is oversimplified on various grounds. different variables may affect how students are engaged with not only the language but also with the task itself. the present study was conducted to investigate language and task related engagement on the basis of the task typolog...

15 صفحه اول

MECHANICAL PROPERTIES OF DENTAL COMPOSITE MATERIALS REINFORCED WITH MICRO AND NANO-SIZE Al2O3 FILLER PARTICLES

Abstract: Composite specimens were prepared by dispersion of various amounts of nano-sized Al2O3 fillers in a monomer system containing 60% Bis-GMA and 40% TEGDMA. For comparative purposes, composite samples containing micrometer size Al2O3 fillers were also prepared following the same procedure. The mechanical properties of the light- cured samples were assessed by three-point flexural strengt...

متن کامل

Combined effects of PEGylation and particle size on uptake of PLGA particles by macrophage cells

Objective:At the present study, relationship between phagocytosis of PLGA particles and combined effects of particle size and surface PEGylation was investigated.  Materials and Methods:Microspheres and nanospheres (3500 nm and 700 nm) were prepared from three types of PLGA polymers (non-PEGylated and PEGylation percents of 9% and 15%). These particles were prepared by solvent evaporation metho...

متن کامل

study of dna interaction with ethylenediaminetetraacetic acid and sesamol food additives

برهمکنش dnaتیموس گاوی طبیعی (ct-dna) با اتیلن دی آمین تترااستات (edta)در بافرtris-hcl با 8/7 ph ( دراین ph،edta به نمک دی سدیم تبدیل می شود) وسسامول در بافر tris-hcl با4/7 ph مورد بررسی قرار گرفته است. edta و سسامول استفاده فراوانی در تکنولوژی غذایی و صنعت شیمیایی دارند. مدل اتصال dna مربوط بهedta بوسیله اسپکتروفتومتری جذب، دورنگ نمایی حلقوی(cd)، ویسکومتری وژل الکتروفورز بررسی شده است. طیفuv ...

15 صفحه اول

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
علوم و تکنولوژی پلیمر

جلد ۲۰، شماره ۳، صفحات ۲۲۷-۲۳۴

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023