the effect of siliconizing and borosiliconizing processes on microstructure and morphology of carbon steel surface layers

نویسندگان

سعیدرضا بخشی

s. r. bakhsi مهدی صالحی و فخرالدین اشرفی زاده

m. salehi

f. ashrafizadeh

چکیده

a study for optimizing of siliconizing and borosiliconizing processes on carbon steels has been carried out. the process parameters, i.e, time and powder mixture, were considered for optimization of the case depth, surface quality and the hardness profile. time and temperature of the processes were 4 hr and 950˚c, respectively. powder mixture in siliconizing process was 2.5% ferrosilicon, 2.5% nh4cl and al2o3, while the optimum simultaneous borosiliconizing process was obtained in a mixture of 90% boronizing powder and 10% siliconizing powder. these powders had already been optimized, individually. this is a depth of layer of about 150μm and maximum hardness value of 600hv0.1 in siliconized steels, and a depth of layer of about 100μm and a hardness value of greater than 3000 hv0.1 in borosiliconized steels. microscopical tests by light microscopes, xrd and edax analyses indicated fe3si and fe5si3 phases within the surface layers of siliconized steel, and b(fesi)3, fe4.9si2b, fesi, feb and fe2b phases within the surface layers of borosiliconized steels.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The Effect of Siliconizing and Borosiliconizing Processes on Microstructure and Morphology of Carbon Steel Surface Layers

A study for optimizing of siliconizing and borosiliconizing processes on carbon steels has been carried out. The process parameters, i.e, time and powder mixture, were considered for optimization of the case depth, surface quality and the hardness profile. Time and temperature of the processes were 4 hr and 950˚C, respectively. Powder mixture in siliconizing process was 2.5% ferrosilicon, 2.5%...

متن کامل

The Effect of Siliconizing and Borosiliconizing Processes on Microstructure and Morphology of Carbon Steel Surface Layers

A study for optimizing of siliconizing and borosiliconizing processes on carbon steels has been carried out. The process parameters, i.e, time and powder mixture, were considered for optimization of the case depth, surface quality and the hardness profile.&#10Time and temperature of the processes were 4 hr and 950˚C, respectively. Powder mixture in siliconizing process was 2.5% ferrosilicon, 2....

متن کامل

the effect of task complexity on lexical complexity and grammatical accuracy of efl learners’ argumentative writing

بر اساس فرضیه شناخت رابینسون (2001 و 2003 و 2005) و مدل ظرفیت توجه محدود اسکهان (1998)، این تحقیق تاثیر پیچیدگی تکلیف را بر پیچیدگی واژگان و صحت گرامری نوشتار مباحثه ای 60 نفر از دانشجویان زبان انگلیسی بررسی کرد. میزان پیچیدگی تکلیف از طریق فاکتورهای پراکندگی-منابع تعیین شد. همه ی شرکت کنندگان به صورت نیمه تصادفی به یکی از سه گروه: (1) گروه موضوع، (2) گروه موضوع + اندیشه و (3) گروه موضوع + اندی...

15 صفحه اول

Effect of Aluminum on Microstructure and Thickness of Galvanized Layers on Low Carbon silicon-Free Steel

In hot dip galvanizing, several parameters such as chemical composition of coating bath, immersion time and surface roughness of specimens could affect microstructure and properties of coating. In this article, the effect of aluminum content, immersion time and surface roughness on structure and properties of alloy layers have been investigated. Specimens of low carbon silicon-free steel with d...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
روش های عددی در مهندسی (استقلال)

جلد ۱۷، شماره ۲، صفحات ۱۵۵-۱۶۸

کلمات کلیدی

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023