investigation of physical and mechanical properties of old magazine recycled fiber and glass fiber- polypropylene hybrid composite
نویسندگان
چکیده
in this research, old magazine (omg) recycled fiber and glass fiber (gf) were mixed at different levels of 10%, 20%, 30% and 40% (based on weight) with two levels of 50% and 60% polypropylene (pp) and then the produced composites evaluated compared to those from net polypropylene. on the basis of obtained results from normalization equations in different treatments done, two treatments has been selected at a point of the better physical and mechanical properties and then chemically modified by maleic anhydride polypropylene (mapp) at two levels of 0 and 4%. achieved results showed that treatments including the ratios 20:20:60 and also 20:30:50 (gf, omg, pp, respectively) were resulted in the composites with improved physical and mechanical properties. utilizing mapp caused to improve the mechanical properties of composites and decrease of thickness swelling, water absorption in two optimum treatments before determined. scanning electron microscopy results showed that in the composites contain of mapp, fibers were desirably compounded with polypropylene.
منابع مشابه
determination of some physical and mechanical properties red bean
چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...
15 صفحه اولEvaluation of Mechanical and Tribological Properties of Glass/Carbon Fiber Reinforced Polymer Hybrid Composite
Polymer matrix composites used in different industrial applications due to their enhanced mechanical properties and lightweight. However, these materials are subjected to friction and wear situations in some industrial and automobile applications. Therefore, there is a need to investigate the wear properties of polymer matrix composite materials. This article emphasizes the dry abrasive wear be...
متن کاملAn Investigation into the Deep Drawing of Fiber-Metal Laminates based on Glass Fiber Reinforced Polypropylene
Abstract Fiber-metal laminates (FMLs) are new type of composite materials which could improve defects of traditional composites in ductility, formability, impact and damage tolerance. Drawing behavior of a thermoplastic based FML was investigated consisting of glass-fiber reinforced polypropylene composite laminate and aluminum AA1200-O as the core and skin layers, respectively. The effects o...
متن کاملGlass Fiber Reinforced Polypropylene Mechanical Properties Enhancement by Adhesion Improvement
Glass fibers (GF) are the reinforcement agent most used in polypropylene (PP) based composites, as they have good balance between properties and costs. However, their final properties are mainly determined by the strength and stability of the polymer-fiber interphase. Fibers do not act as an effective reinforcing material when the adhesion is weak. Also, the adhesion between phases can be easil...
متن کاملMoisture Diffusion Properties of Fabric Composite (Glass Fiber/Epoxy Resin)
In this study, the effect of hygrothermal conditioning on the moisture diffusion properties of the fabric composite (glass fiber/epoxy resin) was investigated. The water uptake of the specimens conditioned in humid environment at different relative humidities (0, 60 and 96 % r.h) at constant temperature (60°C) was evaluated by weight gain measurements. The moisture diffusion properties of the f...
متن کاملPhysico-Mechanical and Tribological Properties of Glass Fiber based Epoxy Hybrid Natural Composite
Polymeric materials reinforced with synthetic fibers like glass, carbon, and aramid provide advantage of high stiffness and strength to weight ratio as compared to conventional materials like wood, concrete etc. Despite of these favours modern researches are going on in the field of natural composites because of low initial cost and availability of ease. I the light of these the present experim...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
جنگل و فرآورده های چوبجلد ۶۸، شماره ۱، صفحات ۲۰۹-۲۲۰
کلمات کلیدی
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023