effect of submerged vane shape on bed sediment management
نویسندگان
چکیده
the shape of a submerged vane is a major factor in the design of a vane system and affects the performance and secondary currents generated by the vanes. this study investigated the effect of five vane shapes on bed sediment processes (local scour at the leading edge and transverse distribution of sediment downstream of the vanes) at four flow intensities for a total of 20 experiments. the results of the comparison of vane-induced bed-level changes show that a vane with a rounded leading edge and decreased thickness in the longitudinal direction performed best at decreasing local scour at the edge of the vane by about 17.3% for u/uc = 0.78, 12.3% for u/uc = 0.93, 6.1% for u/uc = 1.10, and 45.8% for u/uc = 1.19. it was found that decreasing the cross-section area of the vane using shape modification decreased sedimentation and increased the sediment bed level on the high-pressure side of the vane.
منابع مشابه
effect of oral presentation on development of l2 learners grammar
this experimental study has been conducted to test the effect of oral presentation on the development of l2 learners grammar. but this oral presentation is not merely a deductive instruction of grammatical points, in this presentation two hypotheses of krashen (input and low filter hypotheses), stevicks viewpoints on grammar explanation and correction and widdowsons opinion on limited use of l1...
15 صفحه اولExperimental Investigation of Submerged Vanes’ Shape effect on river-bend stability
In river meandering, when flow passes through a bend, reduction of flow velocity and rising hydrostatic pressure cause super elevation phenomena at outer side and reduction of water surface at inner-side of the bend. A helical motion results, causing erosion of the outer side of the bend. Installation of submerged vanes on the stream bed can reduce erosion of the outer bank significantly. In th...
متن کاملCalculation of Optimum Dimensions and Array of Submerged Vanes at Intakes Using the Feasible Direction Method
In recent years, installation of plates in canal beds have been considered for sedimentation control and bed load reduction at canal intake. These planes, called submerged vanes, are different in dimensions. They are installed at intakes in-group with reasonable distance from each other. Presence of these vanes at intakes initiate transverse shear stress on river bed and causes sediment transpo...
متن کاملCalculation of Optimum Dimensions and Array of Submerged Vanes at Intakes Using the Feasible Direction Method
In recent years, installation of plates in canal beds have been considered for sedimentation control and bed load reduction at canal intake. These planes, called submerged vanes, are different in dimensions. They are installed at intakes in-group with reasonable distance from each other. Presence of these vanes at intakes initiate transverse shear stress on river bed and causes sediment transpo...
متن کاملExperimental Investigation on the Deviated Sediment and Flow to Sediment Bypass Tunnels (SBTs) Using Submerged Plates
Sediment Bypass Tunnels (SBTs) are deviant channels that convey the current containing sediments from the upstream of the reservoir to the downstream of the dam. In this research, by applying submerged plates on the entrance of a 90-degree diversion channel for sediment transport, the effect of hydraulic parameters of flow and changes in the angle of plates on sediment transport and deviated fl...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
تحقیقات مهندسی کشاورزیجلد ۱۴، شماره ۳، صفحات ۳۷-۵۰
کلمات کلیدی
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023