chemical, physical, mineralogical, morphology and leaching characteristics of a thermal power plant air heater washing waste
نویسندگان
چکیده
most of electricity is generated by thermal power plants in iran. shahid rajaee thermal power plant consists of four 250mw natural gas and fuel oil burning units that is located at 100 km west off tehran. as a result of fuel oil burning in winter time, boilers air heaters are washed and cleaned frequently. the wastewater originating from air heater washing contains suspended solids and different dissolved heavy metals particularly v, ni, zn, cr, pb. wastewater is then treated in effluent treatment plant by chemical precipitation followed by centrifugal dewatering of sludge. waste from this process contains significant amounts of heavy metals and is considered as specific industrial wastes that should be more characterized under specific wastes act of iran. for the first time in iran, in the present investigation seven composite samples from air heater washing wastewater treatment dewatered sludge were subjected to chemical composition, mineralogy and leaching characteristics studies to better understand the physical and chemical characteristics of this kind of wastes. regarding fuel oil constituents and environmental impacts of metals the most likely pollutants which would be of concern in this study were heavy metals (cd, co, cr, mn, ni, pb, zn and v). results revealed that mean ph, wet and dry density and moisture content of the waste are 6.31, 1532 kg/m3, 1879 kg/m3 and 15.35 % respectively. magnetite, sio2, p2o5, cao, al2o3 and mgo were the main constituents of the waste with the weigh percent order of 68.88, 5.91, 3.39, 2.64, 2.59 and 1.76% respectively. toxicity characteristic leaching procedure (tclp) test results for some heavy metals showed that mean elemental concentrations of cd, co, cr, mn, ni, pb, v and zn in leachate were 0.06, 1.55, 5.49, 36.32, 209.10, 0.58, 314.06 and 24.84 mg/lit respectively. according to specific wastes act of iran this waste can be classified as hazardous due to presence of heavy metals and leaching characteristics and should be disposed regarding hazardous waste disposal considerations.
منابع مشابه
solidification/stabilization of heavy metals from air heater washing wastewater treatment in thermal power plants
in the present investigation, for the first time in iran, dewatered sludge waste from air heater washing wastewater treatment of a thermal power plant was subjected to investigation of the cement base stabilization and solidification experiments in order to reduce the mobility of heavy and other hazardous metals as well as increasing the compressive strength of the solidified product for possib...
متن کاملThermal Performance of a Double-pass Solar Air Heater
This study analyzes the thermal performance of solar thermal energy using double-pass absorber plate in Sanandaj, Iran. To this end, a mathematical model was encoded according to the energy and exergy balance equations and solved by MATLAB software. Given the environmental conditions and radiation intensity of a winter day in Sanandaj, the effects of external parameters such as radiation intens...
متن کاملThermal Behavior of a New Type of Multi-Layered Porous Air Heater
Based on an effective energy conversion method between gas enthalpy and thermal radiation, a multi-layered type of porous air heater has been proposed. In the five layered structure which is analyzed in this work, there are five porous layers which are separated by four quartz glass windows. The main layer operates as a porous radiant burner that products a large amount of thermal radiative ene...
متن کاملA PARAMETRIC STUDY ON THE SULFURIC ACID LEACHING OF VANADIUM OF AN IRANIAN THERMAL POWER PLANT ASH
Vanadium recovery of Thermal Power Plant Ash (TPPA) is an attractive process which simultaneously satisfies the pollution control standards regarding TPPA disposal and provides a valuable source of vanadium for industrial demands. In the present research work, sulfuric acid leaching route has been employed for vanadium recovery from an Iranian TPPA. Effects of acid concentration, temperature, a...
متن کاملchemical recycling of polycarbonate waste using conventional heating and microwave assisted method
پلی کربنات یکی از پلاستیکهای مهمی است که به صورت گسترده در تولید لوحهای فشرده، قطعات رایانه، مواد ساختمانی و غیره مورد استفاده قرار می گیرد. این پلیمر بصورت عمده از تراکم مونومر بیس فنولa (bpa) و کربنیل کلرید یا دی متیل کربنات ها بدست می آید. در سالهای اخیر بازیافت شیمیایی پلی کربنات بیشتر مورد توجه بوده است. بازیافت شیمیایی پلی کربنات برای بدست آوردن مواد اولیه آن با روشهای متفاوتی مانند تجزی...
منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
international journal of environmental researchجلد ۱، شماره ۱، صفحات ۷۴-۷۹
کلمات کلیدی
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023