plastic hinge rotation capacity of reinforced concrete beams
نویسندگان
چکیده
a parametric study is performed to assess the influence of the tension reinforcement index, ( ω = ρ fy /f bc), and the bending moment distribution (loading type) on the ultimate deformation characteristics of reinforced concrete (rc) beams. the analytical results for 15 simply supported beams with different amounts of tension reinforcement ratio under three different loading conditions are presented and compared with the predictions of the various formulations and the experimental data, where available. the plastic hinge rotation capacity increases as the loading is changed from the concentrated load at the middle to the third-point loading, and it is a maximum for the case of the uniformly distributed load. the effect of the loading type on the plastic rotation capacity of the heavily reinforced beams is not as significant as that for the lightly reinforced beams. based on the analytical results obtained using the nonlinear finite element method, new simple equations as a function of the tension reinforcement index, ω, and the loading type are proposed. the analytical results indicate that the proposed equations can be used for analysis of ultimate capacity and the associated deformations of rc beams with sufficient accuracy.
منابع مشابه
Development of Shear Capacity Equations for Rectangular Reinforced Concrete Beams
The problem of shear is not yet fully understood due to involvement of number of parameters. Designers are extra careful about shear, especially in beams and consequently higher safety factors are used in shear design. Several equations are available in literature to determine the shear capacity of beams, i.e. ACI equation, Zsutty equation and KIM & White equation. To verify the application of ...
متن کاملFlexural Behavior of Reinforced HPFRCC Beams
High Performance Fiber Reinforced Cementitious Composite (HPFRCC) materials exhibit strain hardening behavior with multiple cracking under tensile loading. In this paper, experimental and parametric studies are performed to assess the influence of using HPFRCC material instead of normal concrete in reinforced concrete beams. After calibrating the experimental results, the analytical results inc...
متن کاملPlastic hinge models for the seismic assessment of reinforced concrete wall-type piers with detailing deficiencies
Plastic hinge models are widely used in earthquake engineering to predict the load-deformation relationships of reinforced concrete members. For the seismic assessment of bridges, it is appealing to use those relatively simple models if the response is predicted with sufficient accuracy. The applicability of these models to wall-type bridge piers with weak seismic detailing is examined. Flexura...
متن کاملReliability evaluation of reinforced concrete beams
The purpose of this paper is to evaluate the time-invariant reliability of reinforced concrete beams designed under the provisions of the ACI Building Code. A wide range of practical design situations is considered. The beams are subjected to bending, shear, and torsion. The interaction between shear and torsion is considered via an elliptical failure surface defined in the shear-torsion stress...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
international journal of civil engineeringجلد ۵، شماره ۱، صفحات ۳۰-۴۷
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023