a comparision between plastic shrinkage of concrete containing silica fume and the normal concrete
نویسندگان
چکیده
plastic shrinkage is one of the most important parameter which must be considered in hot weather concreting. if plastic shrinkage is not prevented, cracking will be significant, especialy if silica fume is used in the mix. in this paper, the effect of silica fume in bleeding and evaporation was investigated in laboratory. the results showed that in restrained shrinkage, beside relative humidity, temperature and wind velocity, sun rediation also is very important factor in evaporation rate. it is found that under solar radition condition, the evaporation was much larger than the estimated value in aci 305 nomogram. the rate of evaporaion under solar radiation was about two folds of evaporation rate under shade condition. the results showed that in terms of crack initiation time, crack width and total cracking area, concrete containing silica fume is more severe than concrete with no silica fume. reduction of water cement ratio in concrete with silica fume makes the concrete more sensitive in cracking. the results of this project also showed that the severity of the cracking is not related only to rate of bleeding but all environmental factors including like sun radiation or shading and also mix compositions have important roles.
منابع مشابه
Influence of Silica Fume on Normal Concrete
The incorporation of silica fume into the normal concrete is a routine one in the present days to produce the tailor made high strength and high performance concrete. The design parameters are increasing with the incorporation of silica fume in conventional concrete and the mix proportioning is becoming complex. The main objective of this paper has been made to investigate the different mechani...
متن کاملEffects of Silica Fume in Conventional Concrete
The production of tailor made high strength and high performance concrete are made by incorporating silica fume into the normal concrete and it is a routine one in the present days. The mix proportioning is intricate and the design parameters are increased due to the incorporation of silica fume in conventional concrete. The aim of this paper is to look into the different mechanical properties ...
متن کاملThe Effect of Recurring on Physical Properties of Concrete Containing Silica-Fume with Improper First Curing
As regards if curing stops for some time and then resumes again, then strength gain will also stop and reactive, in this study with choose suitable curing conditions after improper first curing (recurring) for normal and silica-fume concrete, Effect of this curing conditions on strength and permeability was investigated. The results from tests such as compressive strength, capillary water absor...
متن کاملImproving the workability and strength of silica fume concrete by using silane-treated silica fume
Mortar with high workability even without a water-reducing agent and with high tensile and compressive strengths (3.1 and 78 MPa, respectively) was obtained by using as an admixture silica fume that had been surface treated with a silane coupling agent. The treatment enhanced the wettability of silica fume by water, thereby increasing the workability of the mortar mix. It also enhanced the bond...
متن کاملInfluence of Nano-Silica and Silica Fume in the Steel Corrosion Embedded in Concrete
Corrosion of steel is one of the most important potential dangers and threats in concrete structures. Corrosion of steel embedded in reinforced concrete plays a key role in reducing the strength and durability of reinforced concrete. Several studies have proposed that alternative approaches to enhancing the performance of reinforced concrete and its resistance to corrosion. In this study, the r...
متن کاملSignificance of Silica Fume in Enhancing the Quality of Concrete
In the Refractories world three decades ago, very few people were acquainted to silica fume and its usage. After a few years, it was used as an additive to brick. When added to high Alumina brick, mullite was formed in the matrix of the brick on firing, giving the brick good volume stability, strength and chemical resistance. When used in basic brick, high hot strengths resulted, at least at 27...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
international journal of civil engineeringجلد ۵، شماره ۴، صفحات ۲۶۶-۲۷۳
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023