investigating the properties of asphalt concrete containing glass fibers and nanoclay

the performance of asphaltic pavements during their service life is highly dependent on the mechanical properties of the asphaltic layers. therefore, in order to extend their service life, scientists and engineers are constantly trying to improve the mechanical properties of the asphaltic mixtures. one common method of improving the performance of asphaltic mixtures is using different types of additives. this research investigated the effects of reinforcement by randomly distributed glass fibers and the simultaneous addition of nanoclayon some engineering properties of asphalt concrete have been investigated. the properties of a typical asphalt concrete reinforced by different percentages of glass fibers were compared with those containing both the fibers and nanoclay. engineering properties, including marshall stability, flow, marshall quotient, volumetric properties and indirect tensile strength were studied. glass fibers were used in different percentages of 0.2, 0.4 and 0.6% (by weight of total mixture), and nanoclay was used in 2, 4 and 6% (by the weight of bitumen). it was found that the addition of fibers proved to be more effective than the nanoclay in increasing the indirect tensile strength. however, nanoclay improved the resistance of the mixture against permanent deformation better than the glass fibers. the results also showed that the mixture reinforced by 0.2% of glass fiber and containing 6% nanoclay possessed the highest marshall quotient, and the mixture containing 0.6% glass fibers and 2% nanoclay possessedthe highest indirect tensile strength.