mechanical properties of seva / hydroxyapatite composite with to hap different particle sizes

نویسندگان

z. zhang

department of biomedical engineering, tampere university, tampere, finland. b. fazeli

department of biomedical engineering, tampere university, tampere, finland.

چکیده

hydroxyapatite is a biocompatible ceramic and reinforcement for bone implantations. seva/hap composite content hap filler with difference particle sizes were designed. mechanical tests like tensile modulus, uts, strain at break and biodegradation were investigated. results illustrated much increase tensile modulus of composites content hap nano powders ratio to micro powders. also uts analysis of composites illustrated much increase uts of composites content hap nano powders ratio to micro powders and strain at break analysis of composites illustrated much decrease of strain at break composites content hap nano powders ratio to micro powders. the composites degradation in pbs solution showed slowly degradation time of composites content hap nano powders ratio to micro powders filler.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Mechanical properties of SEVA / hydroxyapatite composite with to HAP different particle sizes

Hydroxyapatite is a biocompatible ceramic and reinforcement for bone implantations. SEVA/HAP composite content HAP filler with difference particle sizes were designed. Mechanical tests like tensile modulus, UTS, strain at break and biodegradation were investigated. Results illustrated much increase tensile modulus of composites content HAP nano powders ratio to micro powders. Also UTS analysis ...

متن کامل

Mechanical properties of SEVA / hydroxyapatite composite with to HAP different particle sizes

Hydroxyapatite is a biocompatible ceramic and reinforcement for bone implantations. SEVA/HAP composite content HAP filler with difference particle sizes were designed. Mechanical tests like tensile modulus, UTS, strain at break and biodegradation were investigated. Results illustrated much increase tensile modulus of composites content HAP nano powders ratio to micro powders. Also UTS analysis ...

متن کامل

Mechanical properties of hydroxyapatite whisker reinforced polyetherketoneketone composite scaffolds.

The apparent mechanical properties of hydroxyapatite (HA) whisker reinforced polyetherketoneketone (PEKK) scaffolds were evaluated in unconfined, uniaxial compression to investigate the effects of the porosity (75%, 82.5% and 90%), HA content (0, 20 and 40 vol%) and mold temperature (350, 365 and 375 ( composite function)C). Increased porosity resulted in a non-linear decrease in the elastic mo...

متن کامل

Study of milling effect on particle size and mechanical properties of WC-Co composite

The effect of milling on the particle size and mechanical properties Tungsten Carbide - Cobalt composite were investigated. First, raw materials ratios by mechanical milling for 4 hours at 300 rpm were mixed. The powder in the optimum temperature 1350°C at a rate of temperature rise 50°C / min and shelf life of 4 minutes and the pressure MPa 30 were sintered in SPS. The results indicated nearly...

متن کامل

Study of milling effect on particle size and mechanical properties of WC-Co composite

The effect of milling on the particle size and mechanical properties Tungsten Carbide - Cobalt composite were investigated. First, raw materials ratios by mechanical milling for 4 hours at 300 rpm were mixed. The powder in the optimum temperature 1350°C at a rate of temperature rise 50°C / min and shelf life of 4 minutes and the pressure MPa 30 were sintered in SPS. The results indicated nearly...

متن کامل

Effect of TiO2 Particle Concentration on Microstructure and Mechanical Properties of Ni-P-TiO2 Composite Coatings

Ferritic stainless steels are widely used in equipment, including parts in turbines, electrical industries, aerospace, automotive and decorating industries. One of the problems with this type of steels is their low wear resistance. One of the ways to overcome this problem is to apply a wear-resistant coating on the surface of steel. In this research, nickel phosphorus-titanium oxide coating was...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
international journal of nano dimension

جلد ۱، شماره ۲، صفحات ۱۰۳-۱۰۹

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023