nanodimensional almcm-41 material for adsorption of dyes: thermodynamic and kinetic studies

نویسندگان

shabnam sohrabnezhad

department of chemistry, faculty of science, university of guilan, p.o. box 1914, rasht, iran. a. habibi-yangjeh

department of chemistry, university of mohaghegh ardabili, p.o. box 179, ardabil, iran. s. eftekhari

department of chemistry, university of mohaghegh ardabili, p.o. box 179, ardabil, iran.

چکیده

almcm-41 was applied for adsorption of methylene blue (mb) and auramine (au) in single and binary component systems. in the single component systems, almcm-41 represents higher adsorption capacity for mb than au with the maximal adsorption capacity of 2.07×10−4 and 1.15×10−4 mol/g at 25 ˚c for mb and au, respectively. in the binary component system, mb and au exhibit competitive adsorption onto the adsorbent. in single and binary component systems, kinetic and adsorption isotherm studies demonstrate that the data are following pseudo-second-order kinetic model and langmuir isotherm. also, in both cases, kinetic data is fairly described by two-step diffusion model.  effect of solution ph on the adsorption of mb and au in single and binary component systems was studied and the results were described by electrostatic interactions.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Nanodimensional AlMCM-41 material for adsorption of dyes: Thermodynamic and kinetic studies

AlMCM-41 was applied for adsorption of methylene blue (MB) and auramine (AU) in single and binary component systems. In the single component systems, AlMCM-41 represents higher adsorption capacity for MB than AU with the maximal adsorption capacity of 2.07×10−4 and 1.15×10−4 mol/g at 25 ˚C for MB and AU, respectively. In the binary component system, MB and AU exhibit compe...

متن کامل

Nanodimensional AlMCM-41 material for adsorption of dyes: Thermodynamic and kinetic studies

AlMCM-41 was applied for adsorption of methylene blue (MB) and auramine (AU) in single and binary component systems. In the single component systems, AlMCM-41 represents higher adsorption capacity for MB than AU with the maximal adsorption capacity of 2.07×10−4 and 1.15×10−4 mol/g at 25 ˚C for MB and AU, respectively. In the binary component system, MB and AU exhibit compe...

متن کامل

Isothermal and thermodynamic studies of the adsorption of safranine on MCM-41

The uses of MCM-41 as adsorbent have been studied as an alternative substitution of activated carbon for theremoval dyes. This adsorbent was prepared at laboratory by authors. Adsorption of safranine on MCM-41was studied to examine adsorption thermodynamics. In this study was investigated the effect of proccesparameters like pH, initial dye concentration, temperature and adsorbent mass. MCM-41,...

متن کامل

Acid Dyes Removal from textile wastewater using waste cotton activated carbon: Kinetic, isotherm, and thermodynamic studies

The present study aims at investigating the potential of activated carbon AC prepared from waste cotton fiber for the removal of Acid Dyes from aqueous solutions. The prepared activated carbon was characterized by pore structure analysis, Fourier transforms infrared spectroscopy FTIR. Batch adsorption studies were carried out and the effect of experimental parameters such as pH, initial dye con...

متن کامل

Thermodynamic and Kinetic Studies: Adsorption of Fe (III) onto Corncob

Heavy metals released into the surface and ground water has been a major preoccupation for many years because of their increased discharge, acute toxicity, non-biodegradable nature and tendency for bioaccumulation [1-3]. Iron a common contaminant enters the water bodies through effluents of industries such as electroplating, mining, steel processing etc. The presence of Fe (II) in water results...

متن کامل

Kinetic and thermodynamic studies of adsorption of 4-chloro-2-nitrophenol on nano- Ti02

Adsorption capacity of 4-chloro-2-nitrophenol (4C2NP) onto nano-Ti02 from aqueous solutions wasinvestigated in a batch system by considering the effects of various parameters like contact time, nano-TiO2 dosage, initial pH and initial 4C2NP concentration. Optimum conditions for 4C2NP adsorptionwere found to be initial pH z 2, nano-TiO2 closer- 0.01 g and equilibrium time 1 h. The adsorptionkine...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
international journal of nano dimension

جلد ۴، شماره ۲، صفحات ۹۱-۱۰۴

کلمات کلیدی
[ ' c o m p e t i t i v e a d s o r p t i o n ' , ' n a n o d i m e n s i o n a l a l m c m ' , 4 1 , ' a d s o r p t i o n k i n e t i c ' , ' a d s o r p t i o n i s o t h e r m ' , ' m e t h y l e n e b l u e ' , ' a u r a m i n e ' ]

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023