a visible light driven doped tio2 nanophotocatalyst: preparation and characterization

نویسندگان

s. m. e. zakeri

separation processes research group (sprg), department of engineering, university of kashan, kashan, iran. m. asghari

energy research institute, university of kashan, ghotb-e-ravandi ave., kashan, iran. m. feilizadeh

chemical and petroleum engineering deportment, sharif university of technology, tehran, iran. m. vosoughi

chemical and petroleum engineering deportment, sharif university of technology, tehran, iran.

چکیده

a useful nanophotocatalyst (la,s-tio2) was prepared by a sol-gel method and characterized by uv–vis diffuse reflectance spectroscopy (drs), x-ray diffraction (xrd), photoluminescence emission spectroscopy (pl) and scanning electron microscopy (fesem). the results showed that the la,s-tio2, which calcined at 550 °c, contained only anatase phaseand its crystal size was 23 nm. in addition, the fesem analysis indicates that the la,s-tio2 nano particles with diameter of 20 to 25 nm could have a good dispersion in solution. in order to evaluate of activity of the modified synthesized photocatalyst (la,s-tio2), comparison between modified synthesized tio2 (la,s-tio2) and pure synthesized tio2 for degradation of methyl orange was investigated. it was found that the modified synthesized photocatalysis (la,s-tio2) has much higher photocatalytic activity than undoped tio2 for the degradation of contamination.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A visible light driven doped TiO2 nanophotocatalyst: Preparation and characterization

A useful nanophotocatalyst (La,S-TiO2) was prepared by a sol-gel method and characterized by UV–vis diffuse reflectance spectroscopy (DRS), X-ray diffraction (XRD), photoluminescence emission spectroscopy (PL) and scanning electron microscopy (FESEM). The results showed that the La,S-TiO2, which calcined at 550 °C, contained only anatase phaseand its crystal size was 23 nm...

متن کامل

A visible light driven doped TiO2 nanophotocatalyst: Preparation and characterization

A useful nanophotocatalyst (La,S-TiO2) was prepared by a sol-gel method and characterized by UV–vis diffuse reflectance spectroscopy (DRS), X-ray diffraction (XRD), photoluminescence emission spectroscopy (PL) and scanning electron microscopy (FESEM). The results showed that the La,S-TiO2, which calcined at 550 °C, contained only anatase phaseand its crystal size was 23 nm...

متن کامل

Synthesis and characterization of visible light active S-doped TiO2 nanophotocatalyst

S-doped and bare mesoporous TiO2 were prepared using titanium tetraisopropoxide and thiocarbamide as raw materials. Prepared materials were characterized by means of fourier transform infrared spectroscopy FT-IR, thermogravimetry-differential scanning calorimetry (TG-DSC), X-ray diffraction (XRD), UV–Vis absorption spectroscopy, Brunauer–Emmett–Teller (BET) specific surface area and Barrett–Joy...

متن کامل

Synthesis and characterization of visible light active S-doped TiO2 nanophotocatalyst

S-doped and bare mesoporous TiO2 were prepared using titanium tetraisopropoxide and thiocarbamide as raw materials. Prepared materials were characterized by means of fourier transform infrared spectroscopy FT-IR, thermogravimetry-differential scanning calorimetry (TG-DSC), X-ray diffraction (XRD), UV–Vis absorption spectroscopy, Brunauer–Emmett–Teller (BET) specific surface area and Barrett–Joy...

متن کامل

synthesis and characterization of visible light active s-doped tio2 nanophotocatalyst

s-doped and bare mesoporous tio2 were prepared using titanium tetraisopropoxide and thiocarbamide as raw materials. prepared materials were characterized by means of fourier transform infrared spectroscopy ft-ir, thermogravimetry-differential scanning calorimetry (tg-dsc), x-ray diffraction (xrd), uv–vis absorption spectroscopy, brunauer–emmett–teller (bet) specific surface area and barrett–joy...

متن کامل

Fabrication and Characterization of Visible Light active Fe-TiO2 Nanocomposites as Nanophotocatalyst

   In this research Fe-TiO2 nanocomposites with different molar ratios of Fe/Ti were prepared as nano-photocatalyst using a modified Sol-Gel process at ambient temperature. Crystallographic properties of nanocomposites were characterized by X-ray Diffraction (XRD). Surface morphology and mean particle size of nanocomposites were specified by Field Emission Scann...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
international journal of nano dimension

جلد ۵، شماره Issue ۴، صفحات ۳۲۹-۳۳۵

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023