color stability of a microhybrid resin composite polymerized with led and qth light curing units
نویسندگان
چکیده
introduction: discoloration of resin composites is a common reason for replacement of these restorations. the aim of this study was to eva-luate the influence of different light curing de-vices on color stability of a microhybrid resin composite. materials and methods: 80 disc-shaped speci-mens (8 mm in diameter, 2-mm height) were fabricated from filtek z250 resin composite. specimens were divided into 4 groups (n=20) and cured with led (bluephase c5, valo) or qth (astralis7 with two different light intensity) light curing devices. baseline color of each specimen was measured with a spectrophotometer according to the cie (l*a*b*) color scale. ( cie l*a*b* is a color measurement system with dimension l for lightness and a and b for the color-opponent dimensions). each subgroup (n=10) were immersed in tea or artificial saliva for 72h at 37°c. the color values of specimens were re-measured and the color change values (δe*ab) were calculated using one-way anova and tukey test. a p value of <0.05 was considered significant. results: in groups immersed in tea, specimens cured with high power mode of astralis7 (750mw/cm2), showed the statistically signifi-cant lowest color change. there was no statisti-cally significant difference between two types of light emitting diode units. conclusion: conventional halogen light (qth) with high power mode showed the maximum color stability in tea.
منابع مشابه
Color Stability of a Microhybrid Resin Composite Polymerized with LED and QTH Light Curing Units
Introduction: Discoloration of resin composites is a common reason for replacement of these restorations. The aim of this study was to eva-luate the influence of different light curing de-vices on color stability of a microhybrid resin composite. Materials and Methods: 80 disc-shaped speci-mens (8 mm in diameter, 2-mm height) were fabricated from filtek Z250 resin composite. Specimens wer...
متن کاملColor Stability of a Microhybrid Resin Composite Polymerized with LED and QTH Light Curing Units
متن کامل
Hardness of composite resin polymerized with different light-curing units
Introduction: The degree of polymerization depends on the type of light-curing unit. The aim of this study was to compare the hardness of composite resin cured by LED and Halogen light curing units. Methods: In this experimental study, 20 cylindrical samples of Tetric Ceram composite were prepared. Half of them were cured with Ultralume 2 LED and the other half with Astralis 7 Halogen light ...
متن کاملHardness of composite resin polymerized with different light-curing units
Introduction: The degree of polymerization depends on the type of light-curing unit. The aim of this study was to compare the hardness of composite resin cured by LED and Halogen light curing units. Methods: In this experimental study, 20 cylindrical samples of Tetric Ceram composite were prepared. Half of them were cured with Ultralume 2 LED and the other half with Astralis 7 Halogen light cur...
متن کاملHardening of dual-cure resin cements and a resin composite restorative cured with QTH and LED curing units.
OBJECTIVE The aim of this study was to determine the effects of light intensity and type of light unit (quartztungsten-halogen [QTH] or light-emitting diode [LED]) on the hardening of various resin cements and a resin composite restorative. METHODS Disk specimens were prepared from 4 dual-cured resin cements (Variolink II, Calibra, Nexus 2 and RelyX ARC). Two QTH light-curing units (Visilux 2...
متن کاملCuring depth of composite resin light cured by LED and halogen light-curing units
The purpose of this study was to evaluate the polymerization effectiveness of a composite resin (Z-250) utilizing microhardness testing. In total, 80 samples with thicknesses of 2 and 4 mm were made, which were photoactivated by a conventional halogen light-curing unit, and light-curing units based on LED. The samples were stored in water distilled for 24 h at 37 ° C. The Vickers microhardness ...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
journal of dentomaxillofacil radiology, pathology and surgeryجلد ۲، شماره ۴، صفحات ۷-۱۴
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023